INFLUENCE OF SELECTED ADDITIVES ON WARM ASPHALT MIXTURES PERFORMANCE

Authors

  • Mohammed Abbas Al-Jumaili Dept. of Civil Engineering, Faculty of Engineering–University of Kufa
  • Hamid Athab Al-Jameel Dept. of Civil Engineering, Faculty of Engineering–University of Kufa

DOI:

https://doi.org/10.30572/2018/KJE/621145

Keywords:

Aspha-min, Indirect tensile strength, Indirect tensile resilient modulus, Indirect tensile fatigue, Rut depth, Sasobit, Crumb rubber and warm mix asphalt (WMA)

Abstract

Warm Mix Asphalt (WMA) is a technology that allows significant lowering of the mixing and compaction temperature of conventional Hot Mix Asphalt (HMA). This research presents the results of laboratory tests conducted to evaluate the properties and performance of warm mix asphalt. TheWMA has been prepared from two asphalt grades and one aggregate source with twoadditives (Aspha-min® and Sasobit®). The crumb rubber is also added to WMA which is prepared withAspha-min® and Sasobit® to evaluate effect of crumb rubber on WMA properties. The results of the study indicated that the two additives to the warm asphalt affected the mixture properties differently. When the mixture properties were compared, it was observed that Aspha-min® reduced the indirect tensile strength and resilient modulus values of the mixes, the two WMA additives increased the rut depths of the mixes, and both the additives reduced the tensile strength ratio of the mixes.WMA contains crumb rubber appears

Downloads

Download data is not yet available.

Downloads

Published

2015-08-19

How to Cite

Al-Jumaili, Mohammed Abbas, and Hamid Athab Al-Jameel. “INFLUENCE OF SELECTED ADDITIVES ON WARM ASPHALT MIXTURES PERFORMANCE”. Kufa Journal of Engineering, vol. 6, no. 2, Aug. 2015, pp. 49-62, doi:10.30572/2018/KJE/621145.

Similar Articles

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 > >> 

You may also start an advanced similarity search for this article.