THE ELECTROCHROMIC PROPERTY OF WO3 THIN FILM PREPARING BY MAGNETRON SPUTTERING UNDER VARIOUS CRYSTAL STRUCTURES

Authors

  • Haider A. Shukur Electronic and Communication Department, faculty of engineering, University of Kufa, Najaf, Iraq

DOI:

https://doi.org/10.30572/2018/KJE/831155

Keywords:

Thin films, WO3, Electrochromic characteristics, Sputtering Deposition

Abstract

Tungsten Trioxide (WO3) thin films with a various crystal structure have been fabricated by a magnetron sputtering method. The effect of changing of crystal structure on the Electrochromic (EC) property was investigated. Atomic force microscopy (AFM) and X-ray diffraction (XRD) have been employed to investigate morphology and structure. For EC measurement, 0.1M LiClO4 aqueous solution was used as electrolyte, and Pt and Ag/AgCl were used for counter and reference electrodes respectively. WO3 thin film with a various structure has been obtained by changing reactive gas (Ar) gas and O2 flow rates. Fabricated WO3 thin films with 002 and 112 crystal structures have a high Electrochromic (EC) response.

Downloads

Download data is not yet available.

Downloads

Published

2017-11-12

How to Cite

A. Shukur, Haider. “THE ELECTROCHROMIC PROPERTY OF WO3 THIN FILM PREPARING BY MAGNETRON SPUTTERING UNDER VARIOUS CRYSTAL STRUCTURES”. Kufa Journal of Engineering, vol. 8, no. 3, Nov. 2017, pp. 46-54, doi:10.30572/2018/KJE/831155.

Similar Articles

1 2 3 4 5 6 > >> 

You may also start an advanced similarity search for this article.