THE INFLUENCE OF SINTERING TEMPERATURE, SLIDING SPEED, AND SLIDING TIME ON THE WEAR RATE OF YTTRIUM-TETRAGONAL ZIRCONIA POLYCRYSTALS (3Y-TZP) FOR DENTAL APPLICATION
DOI:
https://doi.org/10.30572/2018/KJE/150102Keywords:
Ceramic, Zirconia, Friction, Wear Rate, Wear, Sintering Temperature, Sliding Speed, Sliding TimeAbstract
In this thesis, the samples of dental zirconia were sintered to various temperatures (1250,1350, and 1450) °C, and subjected to friction between them in saliva at two different sliding speeds (200 and 400 revolutions per minute) and in various periods (10, 20, and 30 minutes) by using pin on disc wear testing machine, the wear rate was affected by several factors (sintering temperature, sliding speed, and sliding time). Where the rate of wear decreased by the increase of one of these factors with the stabilization of the other two factors.
Downloads
References
Gupta, J., (2009). Mechanical and wear properties of carburized mild steel samples (Doctoral dissertation). https://core.ac.uk/reader/53187220
Janyavula, S., Lawson, N., Cakir, D., Beck, P., Ramp, L.C. and Burgess, J.O., (2013). The wear of polished and glazed zirconia against enamel. The Journal of prosthetic dentistry, 109(1), pp.22-29. DOI: https://doi.org/10.1016/S0022-3913(13)60005-0
Jitwirachot, K., Rungsiyakull, P., Holloway, J.A. and Jia-Mahasap, W., (2022). Wear behavior of different generations of zirconia: present literature. International Journal of Dentistry, 2022. DOI: https://doi.org/10.1155/2022/9341616
Lambrechts, P., Braem, M., Vuylsteke-Wauters, M. and Vanherle, G., (1989). Quantitative in vivo wear of human enamel. Journal of dental research, 68(12), pp.1752-1754. DOI: https://doi.org/10.1177/00220345890680120601
Mitov, G., Heintze, S.D., Walz, S., Woll, K., Muecklich, F. and Pospiech, P., (2012). Wear behavior of dental Y-TZP ceramic against natural enamel after different finishing procedures. Dental materials, 28(8), pp.909-918. DOI: https://doi.org/10.1016/j.dental.2012.04.010
Mundhe, K., Jain, V., Pruthi, G. and Shah, N., (2015). Clinical study to evaluate the wear of natural enamel antagonist to zirconia and metal ceramic crowns. The Journal of prosthetic dentistry, 114(3), pp.358-363. DOI: https://doi.org/10.1016/j.prosdent.2015.03.001
Pathan, M.S., Kheur, M.G., Patankar, A.H. and Kheur, S.M., (2019). Assessment of antagonist enamel wear and clinical performance of full‐contour monolithic zirconia crowns: one‐year results of a prospective study. Journal of Prosthodontics, 28(1), pp. e411-e416. DOI: https://doi.org/10.1111/jopr.12960
Rekow, E. D., Silva, N. R. F. A., Coelho, P. G., Zhang, Y., Guess, P., and Thompson, V. P. (2011). Performance of dental ceramics: challenges for improvements. Journal of dental research, 90(8), 937-952. DOI: https://doi.org/10.1177/0022034510391795
Schlueter, N., Amaechi, B.T., Bartlett, D., Buzalaf, M.A.R., Carvalho, T.S., Ganss, C., Hara, Huysmans, A.T., Lussi, M.C.D., Moazzez, A.R., and Vieira, A.R., (2020). Terminology of erosive tooth wear: consensus report of a workshop organized by the ORCA and the Cariology Research Group of the IADR. Caries research, 54(1), pp.2-6. DOI: https://doi.org/10.1159/000503308
Stober, T., Bermejo, J.L., Rammelsberg, P. and Schmitter, M., (2014). Enamel wear caused by monolithic zirconia crowns after 6 months of clinical use. Journal of oral rehabilitation, 41(4), pp.314-322. DOI: https://doi.org/10.1111/joor.12139
Tang, Z., Zhao, X., and Wang, H. (2021). Quantitative analysis on the wear of monolithic zirconia crowns on antagonist teeth. BMC Oral Health, 21, pp.1-11. Tiwari, R.A.J.A.N., Sameer, S. and PBS, S., (2014). Tribological behaviour study of ceramic composites (Doctoral dissertation). DOI: https://doi.org/10.1186/s12903-021-01452-z
Tong, H., Tanaka, C. B., Kaizer, M. R., and Zhang, Y. (2016). Characterization of three commercial Y-TZP ceramics produced for their high-translucency, high-strength and high-surface area. Ceramics international, 42(1), 1077-1085. DOI: https://doi.org/10.1016/j.ceramint.2015.09.033
Zhang, Y., Sailer, I., and Lawn, B. R. (2013). Fatigue of dental ceramics. Journal of dentistry, 41(12), 1135-1147. DOI: https://doi.org/10.1016/j.jdent.2013.10.007
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Karrar A. Mzedawee, Iman J. Abed
This work is licensed under a Creative Commons Attribution 4.0 International License.
