HYDRAULIC NETWORK MODEL OF AL-SHUARAA WATER DISTRIBUTION SYSTEM, AL-KUFA, NAJAF, IRAQ
DOI:
https://doi.org/10.30572/2018/KJE/170418Keywords:
Hydraulic analysis, Distribution network, EPANET softwareAbstract
Hydraulic modeling, as a common method for evaluating operational shortcomings in drinking water distribution networks, is the basis to assess their real performance. These evaluations are crucial for sustainable planning, particularly in light of the growing urbanization and population density that will contribute to a higher demand for an uninterrupted water supply. A hydraulic model of Al-Shuaraa water distribution network was performed using EPANET to calculate the pressure and flow velocity for maximum and minimum demands in this study. The findings of simulation indicate that the pressure (0.76-0.98 bar) and velocity (<0.7 m/s) values are lower than recommended standards. These deficiencies can result in inadequate water supply—most notably to higher rise buildings—and serious issues with drinking water quality, such as sediment accumulation and backflow due to low flows. The conclusion is that urgent hydraulic rehabilitation on the Al-Shuaraa network is necessary too guarantee service reliability, and to maintain water quality. Future improvement strategies should utilize directly driven booster pumps, elevated storage tanks and process up the entire pipeline replacement in critical zones. It is further recommended to combine hydraulic modeling with demand forecasting and non-revenue water management for considerations of sustainable long-term planning, continuous, safe delivery of an efficient water supply system
Downloads
References
Abed, Z.H. and Khudair, K.M. (2023) ‘Modeling of turbidity distribution in water networks using PMS model – Al-Saray sector in Kufa city as a case study’, Kufa Journal of Engineering, 14(3), pp. 48–68.
Al-Aboudi, H., Hassan, A. and Al-Rawi, A. (2015) ‘Hydraulic Network Model of Water Distribution System in Al-Hakeem Quarter, Maqil District, Basrah, South of Iraq’.
Al-Dulaimi, S. and Al-Ani, R. (2021) ‘Hydraulic performance analysis of Karrada District Water Network, Baghdad City’, E3S Web of Conferences, 318, 04004.
Al-Jubouri, M. and Al-Zubaidi, K. (2025) ‘Evaluating hydraulic performance of two district water distribution networks in Baghdad City using WaterCAD and QGIS’.
Al-Rubaie, A. (2023) Hydraulic analysis and modelling of water distribution network in Al-Rusafa District, Baghdad. MSc thesis. University of Baghdad.
Alshammery, H. (2004) Water pressure equalization in pipe. MSc thesis. University of Baghdad, Iraq.
Bentley Systems (2023) WaterGEMS: Water Distribution Modeling and Analysis.
EPA (2023) EPANET: Water Distribution Modeling Software. U.S. Environmental Protection Agency.
McGhee, T.J. and Steel, E.W. (1991) Water supply and sewerage. 6th ed. New York: McGraw-Hill.
Obura, D., Nabifo, V., Akamushaba, O., Apiny, I. and Dadebo, D. (2024) ‘Development of a user-friendly hydraulic model for simulating hybrid water distribution networks: a transition toward sector sustainability’, Water Supply, 24(5), pp. 1893–1911.
Olmuştur, M.M. and Uysal, F. (2025) ‘Investigation of water losses with real-time pressure management as a case study in Sakarya’, Scientific Reports, 15(1), 26505.
Rossman, L.A. (2000) EPANET 2 user’s manuals. EPA/600/R-00/057. U.S. Environmental Protection Agency, Cincinnati, OH, pp. 1–200
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Hayder M. Jasem

This work is licensed under a Creative Commons Attribution 4.0 International License.












