A Comprehensive Review of Preparation Methods and Their Impact on Barium Titanate Properties

suaad jiaad; Safaa A.  Jasim; Rasha S.  Salih

doi:10.30572/2018/KJE/160324

Authors

suaad jiaad Department of Electromechanical Engineering, University of Technology-Iraq, Baghdad
Safaa A. Jasim Ministry of Education, Iraq
Rasha S. Salih Department of Electromechanical Engineering, University of Technology-Iraq, Baghdad

DOI:

https://doi.org/10.30572/2018/KJE/160324

Keywords:

Barium titanate (BaTiO3), Dielectric Properties, Piezoelectric Properties, Synthesis Methods, Morphology

Abstract

The present research investigates various techniques for producing barium titanate (BaTiO₃) in depth, highlighting how each affects the material's morphology and crystallography and consequently, its electrical and piezoelectric properties. Among the preparation methods taken into consideration were chemical-mechanical, hydrothermal, solid-state reaction, sol-gel, and microwave processes. The study demonstrated that by altering the preparation method, different characteristics and properties can be achieved. Furthermore, the study successfully proved the enhancement of the properties of nanomaterials through the synthesis of BaTiO₃ using advanced techniques, aiming to achieve better results in the future and increase its applicability in modern electronic devices

Downloads

Download data is not yet available.

References

A. Zuo, G. Zhang, J. Zhang, L. Ma. "Effect of ball-milling on the microstructure and dielectric properties of BaTiO3 ceramics." Journal of Materials Science: Materials in Electronics 31 (2020).:1486-1493. doi: 10.1007/s10854-019-02379-0.

Abd Elmoneim M. S. Elbasset, Sameer H. Ahmed. "Synthesis and Characterization of BaTiO3 by Hydrothermal Method." International Journal of Electrochemical Science 14 (2019).:7922-7932. doi: 10.20964/2019.08.07.

Ashiri, R., Nemati, A., Ghamsari, M. S., Sanjabi, S., & Aalipour, M. (2011). A modified method for barium titanate nanoparticles synthesis. Materials Research Bulletin, 46(12), 2291-2295.

Baláž, P. (2003). Mechanochemistry in nanoscience and minerals engineering. Springer.

Boldyrev, V. V. (2006). Mechanochemistry and mechanical activation of solids. Russian Chemical Reviews, 75(3), 177-189.

Brzozowski, E., & Castro, M. S. (2000). Synthesis of barium titanate improved by modifications in the kinetics of the solid state reaction. Journal of the European Ceramic Society, 20(14-15), 2347-2351.

C.J. Brinker, G.W. Scherer, "Sol-gel science: the physics and chemistry of sol-gel processing," Academic Press, 2013.

Chen, H. J., & Chen, Y. W. (2003). Hydrothermal synthesis of barium titanate. Industrial & engineering chemistry research, 42(3), 473-483.

Chieng, B. W., Loo, Y. Y., & Osman, N. A. (2012). Synthesis of nanoparticles via sol-gel method. Ceramics International, 38(6), 4281-4291.

Clark, D. E., & Sutton, W. H. (1996). "Microwave processing of materials." Annual Review of Materials Science, 26(1), 299-331.

de Conti, M., Dey, S., Pottker, W., & La Porta, F. A. (2022). An overview into advantages and applications of conventional and unconventional hydro (solvo) thermal approaches for novel advanced materials design.

Ding, X., & Wang, X. (2008). "Hydrothermal Synthesis and Characterization of Barium Titanate." Journal of the American Ceramic Society, 91(6), 1927-1931.

Dongxu Zhang, Dan Zhang, Hui Zhang, Weifeng Shi, Ling Zhang. "Microwave-assisted hydrothermal synthesis and formation mechanism of cubic barium titanate nanocrystals." Journal of Alloys and Compounds 509 (2011).:5692-5696. doi: 10.1016/j.jallcom.2011.02.062.

Dutta, P. K., & Gregg, J. R. (1992). Hydrothermal synthesis of tetragonal barium titanate (BaTiO3). Chemistry of materials, 4(4), 843-846.

E.K. Nyutu, C.-H. Chen, P.K. Dutta, S.L. Suib, "Effect of Microwave Frequency on Hydrothermal Synthesis of Nanocrystalline Tetragonal Barium Titanate," The Journal of Physical Chemistry C, 2008.

Eckert Jr, J. O., Hung‐Houston, C. C., Gersten, B. L., Lencka, M. M., & Riman, R. E. (1996). Kinetics and mechanisms of hydrothermal synthesis of barium titanate. Journal of the American Ceramic Society, 79(11), 2929-2939.

Ertuğ, B. (2013). The overview of the electrical properties of barium titanate. American Journal of Engineering Research (AJER), 2(8), 1-7.

H. Zarkoob, S. Ziaei-Rad, M. Fathi, H. Dadkhah, "Synthesis, characterization and bioactivity evaluation of porous barium titanate with nanostructured hydroxyapatite coating for biomedical application," Advanced Engineering Materials, 2012.

Haertling, G.H. (1999). Ferroelectric ceramics: History and technology. Journal of the American Ceramic Society, 82(4), 797-818.

Haoyu, Qian., Guisheng, Zhu., Huarui, Xu., Xiuyun, Zhang., Yunyun, Zhao., Dongliang, Yan., Xianyong, Hong., Yin, Han., Fu, Zhenxiao., Ta, Shiwo., Aibing, Yu. "Preparation of tetragonal barium titanate nanopowders by microwave solid-state synthesis." Applied Physics A, 126 (2020).:294-. doi: 10.1007/S00339-020-03472-Y.

Hernández, J. C., & Pérez-Maqueda, L. A. (2006). "Mechanochemical Synthesis of Advanced Materials." International Journal of Nanotechnology, 3(2), 115-132.

Hiroyuki Takenaka, Koji Inagaki, Naoto Ohashi. "Hydrothermal synthesis and sintering of dense barium titanate nanocrystals." Journal of the American Ceramic Society 95 (2012).:669-676. doi: 10.1111/j.1551-2916.2011.04927. x.

Hwang, Y. H., & Lee, D. W. (2000). Hydrothermal synthesis of barium titanate powders. Journal of the American Ceramic Society, 83(3), 2164-2168.

Idehenre, I. U., Barnakov, Y. A., Basun, S. A., & Evans, D. R. (2018). Spectroscopic studies of the effects of mechanochemical synthesis on BaTiO3 nanocolloids prepared using high-energy ball-milling. Journal of Applied Physics, 124(16).

Inada, M., et al. (2015). "Hydrothermal Synthesis of BaTiO3 and Its Dielectric Properties." Journal of the American Ceramic Society, 98(4), 1125-1132.

J. Thomas Karpagalakshmi, R. Kalai Selvan. "Preparation, dielectric and ferroelectric properties of nano-structured BaTiO3 synthesized by sol-gel technique." Materials Research Bulletin 48 (2013).:324-330. doi: 10.1016/j.materresbull.2012.09.015.

Jalil, A. A., & Triwahyono, S. (2009). Sol-gel synthesis of nanoparticles. Advanced Materials Research, 67(1), 165-173.

Joan, Josep, Suñol., L., Escoda. "Novel Materials Synthesis by Mechanical Alloying/Milling." Materials, 15 (2022).:6973-6973. doi: 10.3390/ma15196973.

Kakihana, M. (1996). Hydrothermal synthesis of oxides. Journal of Alloys and Compounds, 219(1), 177-185.

Kambale, K. R., Kulkarni, A. R., & Venkataramani, N. (2014). Grain growth kinetics of barium titanate synthesized using conventional solid state reaction route. Ceramics International, 40(1), 667-673.

Kareiva, A., Tautkus, S., Rapalaviciute, R., Jørgensen, J. E., & Lundtoft, B. (1999). Sol-gel synthesis and characterization of barium titanate powders. Journal of materials science, 34, 4853-4857.

Kim, H. S., et al. (2010). "Solid-State Synthesis and Electrical Properties of Barium Titanate." Journal of Materials Science, 45(9), 2456-2463.

Kinoshita, K., & Yamaji, A. (1976). Grain‐size effects on dielectric properties in barium titanate ceramics. Journal of applied physics, 47(1), 371-373.

Kwon, S. Y., & Park, J. W. (2015). "Sol-gel synthesis and characterization of BaTiO3 ceramics." Journal of the European Ceramic Society, 35(4), 1201-1209.

L.C. Klein, "Sol-gel optics: processing and applications," Springer Science & Business Media, 2013.

Lee, J. H., et al. (2020). "Microwave-Assisted Synthesis and Characterization of Barium Titanate Nanoparticles." Journal of Nanotechnology, 2020, 1-12.

Lemoine, C., Gilbert, B., Michaux, B., Pirard, J. P., & Lecloux, A. (1994). Synthesis of barium titanate by the sol-gel process. Journal of non-crystalline solids, 175(1), 1-13.

M. Selvaraj, V. Venkatachalapathy, J. Mayandi, S. Karazhanov, J.M. Pearce, "Preparation of meta-stable phases of barium titanate by Sol-hydrothermal method," AIP Advances, 2015.

Miclea, C., Tanasoiu, C., Spanulescu, I., Miclea, C. F., Gheorghiu, A., Amarande, L., ... & Miclea, C. T. (2007). Microstructure and properties of barium titanate ceramics prepared by mechanochemical synthesis. Rom. J. Inform. Sci. Technol, 10(4), 335-345.

Monika Singh, Bal Chandra Yadav, Ashok Ranjan, Manmeet Kaur, S.K. Gupta. "Synthesis and characterization of perovskite barium titanate thin film and its application as LPG sensor." Sensors and Actuators B-chemical 241 (2017).:1170-1178. doi: 10.1016/J.SNB.2016.10.018.

Monika, Singh., Bal, Chandra, Yadav., Ashok, Ranjan., Manmeet, Kaur., S.K., Gupta. "Synthesis and characterization of perovskite barium titanate thin film and its application as LPG sensor." Sensors and Actuators B-chemical, 241 (2017).:1170-1178. doi: 10.1016/J.SNB.2016.10.018.

O'Brien, S., Brus, L., & Murray, C. B. (2001). Synthesis of monodisperse nanoparticles of barium titanate: toward a generalized strategy of oxide nanoparticle synthesis. Journal of the American Chemical Society, 123(48), 12085-12086.

Oghbaei, M., & Mirzaee, O. (2010). Microwave versus conventional sintering: A review of fundamentals, advantages and applications. Journal of Alloys and Compounds, 494(1-2), 175-189.

Özen M, Mertens M, Snijkers F, Cool P. Template-free aqueous tape casting of hydrothermally synthesized barium titanate powder and the fabrication of highly {001}-{100} textured tapes. Ceramics International. 2018 Jun 1;44(8):9720-7.

Perera, S. D., & Caruntu, G. (2014). "Microwave-Assisted Synthesis of Nanostructured Materials." Journal of Nanomaterials, 2014, 1-23.

Pfaff, G. (1992). Sol–gel synthesis of barium titanate powders of various compositions. Journal of Materials Chemistry, 2(6), 591-594.

Qian H, Zhu G, Xu H, Zhang X, Zhao Y, Yan D, Hong X, Han Y, Fu Z, Ta S, Yu A. Preparation of tetragonal barium titanate nanopowders by microwave solid-state synthesis. Applied Physics A. 2020 Apr;126:1-9.

Rao, K. J., & Gopalakrishnan, J. (1997). "Synthesis of Inorganic Solids: The Solid-State Approach." Journal of the Chemical Society, 89(3), 1365-1384.

Reverón, H., Aymonier, C., Loppinet-Serani, A., Elissalde, C., Maglione, M., & Cansell, F. (2005). Single-step synthesis of well-crystallized and pure barium titanate nanoparticles in supercritical fluids. Nanotechnology, 16(8), 1137.

Roy, R., Agrawal, D. K., Cheng, J., & Gedevanishvili, S. (1999). Full sintering of powdered-metal bodies in a microwave field. Nature, 399(6737), 668-670.

S. Dash, H.S. Mohanty, K. Bhoi, R. Kant, A. Kumar, R. Thomas, D.K. Pradhan, "Sintering dependent Ca2+ solubility in barium titanate synthesized by sol–gel auto combustion method," Journal of Materials Science: Materials in Electronics, 2018.

Seong Hyeok Choi, Yoon Seok Lee, Sang Heun Lee, Kyu-Ha Beak, Seungchan Cho, Ilguk Jo, Yangdo Kim, Kyoung-Seok Moon, Moon Hee Choi. "Enhancement of dielectric properties and microstructure control of BaTiO3 by seed-induced solid-state synthesis." Ceramics International 49 (2023).:17921-17929. doi: 10.1016/j.ceramint.2023.02.159.

Sobha A., Sumangala R. "Influence of Synthesis Method and the Precursor on the Preparation of Barium Titanate Nano Particles." 6 (2017).:175-182. doi: 10.4172/2321-6212.1000231.

Sonia, Kudłacik-Kramarczyk., Anna, Drabczyk., Magdalena, Głąb., Piotr, Dulian., Rafał, Bogucki., Krzysztof, Miernik., Agnieszka, Sobczak-Kupiec., Bożena, Tyliszczak. "Mechanochemical Synthesis of BaTiO3 Powders and Evaluation of Their Acrylic Dispersions." Materials, 13 (2020).:3275-. doi: 10.3390/MA13153275.

Steven J. Kitchen, Caroline M. Kirk, Robert J. White, Steven J. Kennedy. "Mechanochemical synthesis of barium titanate." Journal of Materials Science 50 (2015).:3977-3985. doi: 10.1007/s10853-015-8933-5.

Stojanovic, B. D., Simoes, A. Z., Paiva-Santos, C. O., Jovalekic, C., Mitic, V. V., & Varela, J. A. (2005). Mechanochemical synthesis of barium titanate. Journal of the European Ceramic Society, 25(12), 1985-1989.

Suzuki, K., & Kijima, K. (2005). Optical Band Gap of Barium Titanate Nanoparticles Prepared by RF-Plasma Chemical Vapor Deposition. Japanese Journal of Applied Physics, 44(4A), 2081.

Tsutomu Homma, Kenta Higuchi, Yuki Noda, Yuta Harada. "Nanocrystalline Barium Titanate Prepared via a Hydrothermal Route and Its Grain Growth." Journal of the American Ceramic Society 92 (2009).:252-255. doi: 10.1111/j.1551-2916.2008.02836.x.

Uchino, K. (2000). "Ferroelectric Devices." CRC Press.

V. Sherlin Vinita, Sajeeka Jeyakumar, C. S. Biju. "Sol-gel synthesis, structural, morphological, X-ray photoelectron spectroscopy, and magnetic properties of Cd doped Barium Titanate nanoparticles." Ceramics International 46 (2020).:20284-20293. doi: 10.1016/j.ceramint.2020.05.110.

V., Sherlin, Vinita., Sajeeka, Jeyakumar., C., S., Biju. "Sol-gel synthesis, structural, morphological, X-ray photoelectron spectroscopy and magnetic properties of Cd doped BaTiO3 nanostructures." Molecular Crystals and Liquid Crystals, null (2023).:1-9. doi: 10.1080/15421406.2023.2228644.

Wan L, Zhu G, Xu H, Zhao Y, Cheng Y, Fu Z, Hu C, Yu A. Low-temperature solid-state synthesis of tetragonal BaTiO3 powders from Ba (OH) 2 and H2TiO3. Applied Physics A. 2022 Oct;128(10):858.

Wang, T., Pang, X., Liu, B., Liu, J., Shen, J., & Zhong, C. (2023). A facile and eco-friendly hydrothermal synthesis of high tetragonal barium titanate with uniform and controllable particle size. Materials, 16(11), 4191.

Waugh, M.D. (2010). Design solutions for DC bias in multilayer ceramic capacitors. Electronic Engineering Times.

Wu, X., et al. (2013). "Sol-Gel Synthesis and Dielectric Properties of BaTiO3 Ceramics." Journal of the European Ceramic Society, 33(7), 1261-1269.

X. Chen et al., "Hydrothermal synthesis of barium titanate nanoparticles and their photocatalytic activity," Journal of Colloid and Interface Science, 2008.

Xiaoqing Guo, Hongyu Chen, Dongfeng Xue, Paul K. Chu. "Rapid microwave-assisted synthesis of BaTiO3 nanoparticles." Journal of Electroceramics 27 (2011).:134-139. doi: 10.1007/s10832-011-9635-y.

Xu, Y. (1991). Ferroelectric Materials and Their Applications. Elsevier Science Publishers B.V.

Xu, Y. (1991). Ferroelectric Materials and Their Applications. North-Holland.

Yanping Chen, Xiaohui Zhang, Yanhong Dong, Qian Lu. "Microwave-assisted synthesis and properties of barium titanate nanopowders." Journal of the American Ceramic Society 95 (2012).:378-383. doi: 10.1111/j.1551-2916.2011.04855.x.

Yoshimura, M., & Byrappa, K. (2008). "Hydrothermal Processing of Materials: Past, Present and Future." Journal of Materials Science, 43(7), 2085-2103.

Yu P, Liu W, Gao P, Shao T, Zhao S, Han Z, Gu X, Zhang J, Wang Y. Investigation on synthesis of tetragonal BaTiO3 nanopowders by a new wet chemical method. Journal of Materials Science: Materials in Electronics. 2022 May;33(14):10828-40.

Yuh, J., Nino, J. C., & Sigmund, W. M. (2005). Synthesis of barium titanate (BaTiO3) nanofibers via electrospinning. Materials Letters, 59(28), 3645-3647.

Zhang, S., & Li, F. (2004). High temperature piezoelectric crystals for sensors and actuators. Journal of Applied Physics, 95(7), 214-229.

Zhang, Y., et al. (2018). "Mechanochemical Synthesis and Enhanced Piezoelectric Properties of Nanocrystalline Barium Titanate." Journal of Nanomaterials, 2018, 1-7.

Zhao, Z., & Buscaglia, V. (2011). "Effect of Synthesis Method on the Structure and Properties of Barium Titanate." Journal of Materials Science, 46(17), 5967-5976.