Peer-Reviewed Articles

232 Items

All Items

  • ZNO THICK FILM GAS SENSOR FOR METHANE SENSING AT ROOM OPERATING TEMPERATURE

    Siti Asma Che Aziz
    464-475
    Abstract View: 21 , PDF Download: 27
    DOI: https://doi.org/10.30572/2018/KJE/170228

  • WTB4: MODAL ANALYSIS OF WIND TURBINE BLADES BEHAVIOR WITH FOUR DISTINCT MATERIALS

    Chandran Nagendran, Sathish Kumar K, Venkatesan S
    132-142
    Abstract View: 119 , PDF Download: 117
    DOI: https://doi.org/10.30572/2018/KJE/170107

  • WEAR PERFORMANCE ANALYSIS OF NYLON-6/BORON NITRIDE POLYMER COMPOSITES USING TAGUCHI-PARETO AND TAGUCHI-ABC METHODS

    Abdulganiyu A. Adekoya, Sunday A. Oke, Wasiu O. Adedeji
    13-32
    Abstract View: 387 , PDF Download: 314
    DOI: https://doi.org/10.30572/2018/KJE/140102

  • Water Quality Evaluation of Diwaniyah River Using The Nemerow Pollution Index

    Ahmed M. Al-Sulaiman, RUSOL M.M Shubbar, BASIM H. K. Al-Obaidi
    1-15
    Abstract View: 602 , PDF Download: 651
    DOI: https://doi.org/10.30572/2018/KJE/160201

  • WASTEWATER SLUDGE ASH IN THE PRODUCTION OF A NOVEL COLD MIX ASPHALT (CMA): DURABILITY, AGING AND TOXICITY CHARACTERISTICS

    Hassan Al Nageim, Aaraf Al-Khuzaie, Linda Seton, Jennifer Croft, Jonathan Drake
    147-162
    Abstract View: 710 , PDF Download: 338
    DOI: https://doi.org/10.30572/2018/kje/150109

  • VARIATIONS IN STRENGTH AND ELASTIC PROPERTIES OF COMPACTED FINE-GRAINED SOILS DUE TO CHANGE IN DEGREE OF SATURATION

    sarah Abdul Abbas Ibrahim, Basil Obaid Mahdi
    452-464
    Abstract View: 187 , PDF Download: 175
    DOI: https://doi.org/10.30572/2018/KJE/160325

  • USING THE ADAPTIVERANDOARMASKAUGMENTATION FUNCTION FOR MEDICAL IMAGE AUGMENTATION AND MASK INPAINTING WITH DEEP LEARNING

    Zainab Adnan Jwad, Dr. israa hadi
    272-290
    Abstract View: 101 , PDF Download: 97
    DOI: https://doi.org/10.30572/2018/KJE/170115

  • Using Orthodontic Wire electrodes in Gel Electrophoresis Device

    Basma Faihan, Eman Ghadhban Khalil, Ziad T. Al-Dahan , Ilham A. Jasim
    167 -179
    Abstract View: 377 , PDF Download: 323
    DOI: https://doi.org/10.30572/2018/KJE/160210

  • TRANSFER LEARNING-DRIVEN DEEP NEURAL NETWORK FRAMEWORK FOR EARLY AND ACCURATE BREAST CANCER DETECTION

    D.B Shanmugam, S. Athinarayanan, A. Josephine Christilda, G. Manoharan
    628-646
    Abstract View: 45 , PDF Download: 37
    DOI: https://doi.org/10.30572/2018/KJE/170238

  • Toward Salient Key Phrase for Candidate Topic Detection

    Yasser S. Jude, Wafaa Al-Hameed
    215 -233
    Abstract View: 313 , PDF Download: 272
    DOI: https://doi.org/10.30572/2018/KJE/160213

  • TORQUE RIPPLE RATE REDUCTION OF 6/4 SWITCHED RELUCTANCE MOTOR USING SLIDING MODE LEARNING CONTROLS

    Zahraa Razaq Mohammed, Abdal-Razak Shehab Hadi
    18-33
    Abstract View: 456 , PDF Download: 358
    DOI: https://doi.org/10.30572/2018/KJE/150402

  • Theoretical and Experimental Investigation of Critical Buckling Load of Combined Columns

    Hayder Zuhair Zainy, Aziz D. Almawash, Saddam K. Al-Raheem , Luay S. Al-Ansari, Mohammed Al-Edhari
    344-360
    Abstract View: 516 , PDF Download: 214
    DOI: https://doi.org/10.30572/2018/KJE/160120

  • THE STUDYOF INSULATING PROPERTIES OF REFRACTORY BRICKS PRODUCED USING MELON SEED HUSKSAS POREFORMER

    Eugenia Obidiegwu, Henry E. Mgbemere, Arhuere O. Akporehe
    61-73
    Abstract View: 459 , PDF Download: 271
    DOI: https://doi.org/10.30572/2018/KJE/150205

  • THE INFLUENCE OF PLATE CONFIGURATION AND CUO NANOFLUIDS ON HEAT TRANSFER AND PRESSURE DROP IN PLATE HEAT EXCHANGERS

    Amina H. Dhaef Alikhan, Hadi O. Mery, sadiq sadiq, Osamah M. Mohammed
    624-638
    Abstract View: 246 , PDF Download: 163
    DOI: https://doi.org/10.30572/2018/KJE/160335

  • THE INFLUENCE OF LANDMARKS' ENERGY ON THE SOCIAL VITALITY OF THE PLACEBASRA’S LANDMARKS AS A CASE STUDY

    Riyam Al-Amara, Noor A. Almansor
    368-387
    Abstract View: 281 , PDF Download: 169
    DOI: https://doi.org/10.30572/2018/KJE/160320

  • THE INFLUENCE OF ADDING NANO-TUNGSTEN CARBIDE ON THE WEAR RATE AND COEFFICIENT OF FRICTION FOR CHOPPED FIBERS COMPOSITE

    Samaher Mohey Fahad, Ali Sadiq Alithari
    261-274
    Abstract View: 20 , PDF Download: 36
    DOI: https://doi.org/10.30572/2018/KJE/170215

  • THE IMPACT OF USING״ WELL STANDARD״ INDICATORS ON INTERNAL WORKPLACES CARBON EMISSIONS

    Atyab Ali Naser, Hamzah S. AL-Mamoori
    62-80
    Abstract View: 513 , PDF Download: 327
    DOI: https://doi.org/10.30572/2018/kje/150105

  • THE IMPACT OF THE MALLEABLE RENEWAL STRATEGY IN ACHIEVING URBAN INTERCONNECTION OF NEW CITY CENTERS THE BISMAYAH RESIDENTIAL COMPLEX CASE STUDY

    Inaam Qassem Abdullah, Khansaa Ghazi Rasheed
    1-22
    Abstract View: 432 , PDF Download: 544
    DOI: https://doi.org/10.30572/2018/KJE/160401

  • THE IMPACT OF A VORTEX GENERATOR ON A MIXTURE OF A JET WITH A MAINSTREAM FLOW OVER A FLAT PLATE

    Nabeel Al-zurfi
    546-563
    Abstract View: 193 , PDF Download: 194
    DOI: https://doi.org/10.30572/2018/KJE/160330

  • THE FLEXURAL BEHAVIOR OF COMPOSITE HYBRID CASTELLATED I-BEAM

    kawthar hussien, Najla'a H. Al-Shareef
    135 -149
    Abstract View: 230 , PDF Download: 302
    DOI: https://doi.org/10.30572/2018/KJE/160208

  • the THE EFFECT OF ZIRCONIUM ADDITIVES ON PROPERTIES OF (Cu22%Zn4%Al) SHAPE MEMORY ALLOY

    Zainab Hassan, Ekbal Mohammed Saeed
    200-213
    Abstract View: 267 , PDF Download: 237
    DOI: https://doi.org/10.30572/2018/KJE/160112

  • THE EFFECT OF SBR LATEX AND WARM MIX AGENT ON THE PERFORMANCE OF DRY AND WET ASPHALT MIXTURES

    Ahmed Eltwati, Bubaker M.B. alkhadar, Haider Abbas, Mahmoud Enieb, Mohammed Abbas Al-Jumaili
    141-156
    Abstract View: 401 , PDF Download: 239
    DOI: https://doi.org/10.30572/2018/KJE/150410

  • THE DRIVING LICENSE AUTHORIZED BASED ON IOT

    Ahmad Alaa-Aldin, Asaad. S. Daghal , Nasir Hussein Selman
    132-145
    Abstract View: 260 , PDF Download: 199
    DOI: https://doi.org/10.30572/2018/KJE/160309

  • THE APPLICATION OF CFRP BARS AND SHEETS IN REINFORCED CONCRETE STRUCTURES: A REVIEW

    Hajir A Al-Hussainy, Mortada Sabeh Whwah
    656-669
    Abstract View: 115 , PDF Download: 120
    DOI: https://doi.org/10.30572/2018/KJE/170137

  • TECHNOLOGY OF ADDITIVE MANUFACTURING: A COMPREHENSIVE REVIEW

    Md. Imam Hossain, Md. Sakib Khan, Imrul Kayes Khan, Khan Rajib Hossain, Yanzhao He, Xiaolong Wang
    108-146
    Abstract View: 945 , PDF Download: 740
    DOI: https://doi.org/10.30572/2018/kje/150108
1-25 of 232