ENHANCED INVESTIGATION OF CREEP AND FLEXURAL BEHAVIOR OF FDM PRINTED PLA CONSIDERING INFILL RATIO AND PRINTING ORIENTATIONS
DOI:
https://doi.org/10.30572/2018/KJE/170407Keywords:
PLA, 3D printing, creep, recovery, infill density, printing orientation, Flexural, FDMAbstract
The creep and flexural behavior of polylactic acid (PLA) specimens made by fused deposition modeling (FDM) at print orientations of 0°, 45°, and 90° and infill densities of 50%, 60%, 70%, 80%, 90%, and 100% are examined in this work. Using a three-point bending technique, standardized tests were performed to assess flexural characteristics and time-dependent deformation under constant load. The findings showed that the flexural modulus and creep strain were considerably impacted by both infill density and print orientation. 100% infill and a 0° orientation produced the best mechanical performance, but lower infill densities and orientations perpendicular to the load direction led to increased creep and decreased bending strength. These findings highlight the importance of optimizing FDM parameters for structural and functional applications, including medical orthotics, automotive prototypes, and educational tools
Downloads
References
Adibeig, A., Rahman, S., Mikhail, V. and Lian, T. (2023) 'Numerical and experimental investigation on creep response of 3D printed polylactic acid', *Materials Science & Engineering A*, [in press].
Ahn, S.-H., Montero, M., Odell, D., Roundy, S. and Wright, P.K. (2002) ‘Anisotropic material properties of fused deposition modeling ABS’, Rapid Prototyping Journal, 8(4), pp. 248–257.
Akhondi, B., Goharian, A. and Mahmodi, F. (2021) ‘Effect of triangular and octahedral infill geometries on flexural modulus’, Metallurgical Journal, 34(2), pp. 101–110.
Bellehumeur, C., Li, L., Sun, Q. and Gu, P. (2004) 'Modeling of bond formation between polymer filaments in the fused deposition modeling process', *Journal of Manufacturing Processes*, 6(2), pp. 170–178.
Chacón, J.M., Caminero, M.A., García-Plaza, E. and Núñez, P.J. (2017) ‘Additive manufacturing of PLA structures using fused deposition modelling: Effect of process parameters on mechanical properties and their optimal selection’, Materials & Design, 124, pp. 143–157.
Coogan, T.J. and Kazmer, D.O. (2017) ‘Bond and part strength in fused deposition modeling’, Rapid Prototyping Journal, 23(2), pp. 414–422.
da Silva, A.F., Sales, A.C.R., Sousa, R.A.S. and Pereira, R.M.S. (2020) ‘Influence of process parameters on mechanical properties of 3D printed PLA using design of experiments’, Polymers, 12(12), 2895.
Dixit, M. and Mishra, A. (2022) ‘Effect of infill pattern on flexural rigidity of FDM PLA parts’, Proceedings of the International Conference on Recent Innovations in Engineering and Technology, pp. 65–70.
Domingo-Espin, M., Puigoriol-Forcada, J.M., Garcia-Granada, A.A., Llumà, J., Borros, S. and Reyes, G. (2015) ‘Mechanical property characterization and simulation of fused deposition modeling polycarbonate parts’, Materials & Design, 83, pp. 670–677.
Emad Sadiq, S., Sadiq, H., Al-Shukri, N., Al-Saedi, H. and Alwan, G. (2025) ‘Free vibration analysis in innovative 3D printing sandwich panels for aircraft structure’, Kufa Journal of Engineering, 16(1), pp. 265–282. DOI: https://doi.org/10.30572/2023/KJE/160125
Farah, S., Anderson, D.G. and Langer, R. (2016) ‘Physical and mechanical properties of PLA, and their functions in widespread applications — A comprehensive review’, Advanced Drug Delivery Reviews, 107, pp. 367–392.
Fischbach, J. and Weinberg, T. (2023) ‘Effect of physical aging on the flexural creep of PLA’, Polymer Testing, 120, 107909.
Goh, G.D., Yap, Y.L., Tan, H.K.J., Sing, S.L., Yeong, W.Y. and Goh, G.L. (2020) ‘Process–structure–properties in polymer additive manufacturing via material extrusion: A review’, Critical Reviews in Solid State and Materials Sciences, 45(2), pp. 113–133.
Gurrala, P.K. and Regalla, S.P. (2014) 'Part strength evolution with bonding between filaments in fused deposition modelling', *Virtual and Physical Prototyping*, 9(3), pp. 141–149.
Khan, M., Han, C., Ye, H. and Zhang, S. (2018) ‘Mechanical properties and failure behavior of PLA with various infill patterns printed by fused deposition modeling’, Polymers for Advanced Technologies, 29(3), pp. 1248–1259.
Lee, C.S., Kim, S.G., Kim, H.J. and Ahn, S.H. (2007) 'Measurement of anisotropic compressive strength of rapid prototyping parts', *Journal of Materials Processing Technology*, 187–188, pp. 627–630.
Letcher, T. and Waytashek, M. (2014) 'Material property testing of 3D-printed specimen in PLA on an entry-level 3D printer', *ASME 2014 International Mechanical Engineering Congress and Exposition*.
MDPI Study (2022) ‘Infill orientation and its influence on stress relaxation and mechanical performance of PLA parts printed by FDM’, Polymers, 14(10), 2103.
Mohamed, O.A., Masood, S.H. and Bhowmik, J.L. (2015) ‘Optimization of fused deposition modeling process parameters: A review of current research and prospects’, Advances in Manufacturing, 3(1), pp. 42–53.
Ngo, T.D., Kashani, A., Imbalzano, G., Nguyen, K.T.Q. and Hui, D. (2018) ‘Additive manufacturing (3D printing): A review of materials, methods, applications and challenges’, Composites Part B: Engineering, 143, pp. 172–196.
Numeric & Experimental (2023) ‘Numerical and experimental investigation of PLA creep behavior using Burgers and Zener models’, Journal of Polymer Science, 61(2), pp. 321–334.
Odili, I., Onuoha, J., Alabi, K. and Ahmed, H. (2021) ‘Biowaste-reinforced PLA composites: Mechanical enhancement and environmental implications’, Journal of Cleaner Production, 314, 128049.
Özdoğan, A., Akbulut, A. and Yazıcı, M. (2025) ‘Parametric optimization of FDM printed PLA parts for maximum flexural strength’, Journal of Manufacturing Processes, 88, pp. 157–166.
Popescu, D., Zapciu, A., Amza, C., Baciu, F. and Marinescu, R. (2018) ‘FDM process parameters influence over the mechanical properties of polymer specimens: A review’, Polymer Testing, 69, pp. 157–166.
Rajkumar, M. (2022) ‘Effect of infill pattern and orientation on modal parameters of PLA parts manufactured by 3D printing’, Journal of Vibration Engineering & Technologies, 10(3), pp. 387–395.
Rankouhi, B., Javadpour, S., Delfanian, F. and Letcher, T. (2016) ‘Failure analysis and mechanical characterization of 3D printed ABS with respect to layer thickness and orientation’, Journal of Failure Analysis and Prevention, 16(3), pp. 467–481.
Sadiq, E., Diwan, A. and Abdulsamad, H.J. (2025) 'Free vibration analysis in innovative 3D printing sandwich panels for aircraft structure', *Kufa Journal of Engineering*, 16(1), pp. 265–282. https://doi.org/10.30572/2018/KJE/160116
Sun, Q., Rizvi, G.M., Bellehumeur, C.T. and Gu, P. (2008) 'Effect of processing conditions on the bonding quality of FDM polymer filaments', *Rapid Prototyping Journal*, 14(2), pp. 72–80.
Tanveer Md. Qamar, Gautam Mishra, Siddharth Mishra, Rohan Sharma ( 2022) Effect of infill pattern and infill density on mechanical behaviour of FDM 3D printed Parts- a current review, Materials Today: Proceedings, Volume 62, Part 1, Pages 100-108
Torrado Perez, A.R., Roberson, D.A. and Wicker, R.B. (2014) ‘Fracture surface analysis of 3D-printed tensile specimens of novel ABS-based materials’, Journal of Failure Analysis and Prevention, 14, pp. 343–353.
Torrado, A.R. and Roberson, D.A. (2015) ‘Failure analysis and anisotropy evaluation of 3D-printed tensile test specimens of different geometries and print raster patterns’, Journal of Failure Analysis and Prevention, 15(3), pp. 322–332.
Triono, A., Widiyarta, G. and Prakoso, L.Y. (2023) ‘Enhancing flexural strength through concentric and triangular infill patterns in 3D printed PLA’, IOP Conference Series: Materials Science and Engineering, 1267(1), 012009.
Tüfekci, M., Kayacan, O. and Arslan, M. (2022) ‘Stress relaxation and tensile performance of PLA parts with various raster angles’, Materials Today: Proceedings, 49, pp. 187–193.
Tymrak, B.M., Kreiger, M. and Pearce, J.M. (2014) ‘Mechanical properties of components fabricated with open-source 3D printers under realistic environmental conditions’, Materials & Design, 58, pp. 242–246.
Wittbrodt, B. and Pearce, J.M. (2015) ‘The effects of PLA color on material properties of 3-D printed components’, Additive Manufacturing, 8, pp. 110–116.
Downloads
Published
Issue
Section
Categories
License
Copyright (c) 2026 Aseel Abbas Hameed, Abbas Ali Diwan, Hussam Jawad Abdulsamad

This work is licensed under a Creative Commons Attribution 4.0 International License.












