SHEAR BEHAVIOR OF CONCRETE BEAMS REINFORCED WITH STRUCTURALLY ENGINEERED STEEL PLATES

Authors

  • Alaa A. Shamki Department of Civil Engineering, College of Engineering, University of Thi-Qar, Thi-Qar, Iraq
  • Majid D. Muttashar Department of Civil Engineering, College of Engineering, University of Thi-Qar, Thi-Qar, Iraq

DOI:

https://doi.org/10.30572/2018/KJE/170406

Keywords:

Reinforced concrete, Beam, Steel plate, Perforated steel plate, Rough surface plate

Abstract

This research presents a new method for enhancing the shear resistance of concrete beams using embedded steel plates instead of traditional bars. Eight specimens of concrete beams reinforced with vertically embedded plates were tested for shear resistance. The specimens were subjected to a four-point load to study their shear strength, load-displacement characteristics, and crack patterns and based on the results obtained, specimen BHC-20%, reinforced with a lateral opening plate with an area equal to 20% of the plate area, had the highest load-carrying capacity, increasing by 173.6% compared to the reference specimen B0. Meanwhile, specimen BM, reinforced with a rough-textured plate, achieved a load-bearing capacity 157.6% higher than the reference specimen B0. Therefore, it is evident that vertically embedded plates can be used as an alternative to traditional shear joints

Downloads

Download data is not yet available.

References

A. M. Ibrahim Lect Wissam D Salman Asst Lect Qusay W Ahmed, “EFFECT OF STEEL PLATES ON SHEAR STRENGTH OF WIDE REINFORCED CONCRETE BEAMS,” 2015.

B. B. Adhikary and H. Mutsuyoshi, “Shear strengthening of RC beams with web-bonded continuous steel plates,” Constr Build Mater, vol. 20, no. 5, pp. 296–307, 2006.

B. H. Osman, E. Wu, J. Bohai, and M. Abdallah, “Repair technique of pre-cracked reinforced concrete (RC) beams with transverse openings strengthened with steel plate under sustained load,” J Adhes Sci Technol, vol. 31, no. 21, pp. 2360–2379, Nov. 2017, doi: 10.1080/01694243.2017.1301073.

G. Arslan, F. Sevuk, and I. Ekiz, “Steel plate contribution to load-carrying capacity of retrofitted RC beams,” Constr Build Mater, vol. 22, no. 3, pp. 143–153, 2008.

H. Abdul Razzaq and N. Jasim, “STRUCTURAL BEHAVIOR OF STEEL-CONCRETE-STEEL SANDWICH STRUCTURE WITH NEW TYPE OF SHEAR CONNECTORS,” Kufa Journal of Engineering, vol. 10, no. 3, pp. 33–52, Jun. 2021, doi: 10.30572/2018/kje/100303.

H. K. Ammash, “Behavior of Reinforcement Concrete Beams Using Steel Strips as a Shear Reinforcements,” 2017. [Online]. Available: http://www.ripublication.com

I. K. Sudarsana, I. P. C. Sajana, and I. G. N. O. Suputra, “Applications of bolted steel plates to shear strengthening of RC beams,” in MATEC Web of Conferences, EDP Sciences, 2019, p. 01002.

J. jarallah Fahad, id Fadhil Abbas, W. Hulail Sultan, and L. Jasim Jarallah Fahad, “Article ID: IJCIET_09_12_092 Jarallah Fahad, Strengthening of Reinforced Concrete Wide Beams Using Steel Plates Within Shear Zone,” International Journal of Civil Engineering and Technology (IJCIET, vol. 9, no. 12, pp. 890–900, 2018, [Online]. Available: http://www.iaeme.com/IJCIET/index.asp890http://www.iaeme.com/ijciet/issues.asp?JType=IJCIET&VType=9&IType=12http://www.iaeme.com/IJCIET/index.asp891http://www.iaeme.com/IJCIET/issues.asp?JType=IJCIET&VType=9&IType=12

K. F. Chai, K. S. Woon, J. K. Wong, J. H. Lim, F. W. Lee, and Y. L. Lee, “Experimental and Numerical Study of the Strength Performance of Deep Beams with Perforated Thin Mild Steel Plates as Shear Reinforcement,” Applied Sciences (Switzerland), vol. 13, no. 14, Jul. 2023, doi: 10.3390/app13148217.

K. F. Sarsam Shakir A Al-Mishhadani Alaa M Al-Habbobi, “EVALUATION THE SHEAR STRENGTH OF FIBROUS REACTIVE POWDER CONCRETE BEAMS STRENGTHENED WITH CFRP STRIPS,” 2014.

M. A. Alam, S. A. Bakkar, S. A. Onik, and K. N. Mustapha, “Embedded Connector in Severe Optimization of Steel Plate for Shear Strengthening of RC Beam: Experimental and Numerical Investigations,” Advances in Civil Engineering, vol. 2018, 2018, doi: 10.1155/2018/4721431.

S. Abdulqader, R. Makki, and M. Mousa, “BEHAVIOR OF SCC BEAMS STRENGTHENED WITH CFRP UNDER SHEAR,” Kufa Journal of Engineering, vol. 10, no. 1, pp. 111–126, Jun. 2021, doi: 10.30572/2018/kje/100109.

X. Liu, Z.-D. Lu, and L.-Z. Li, “The use of bolted side plates for shear strengthening of RC beams: A review,” Sustainability, vol. 10, no. 12, p. 4658, 2018.

X. Wang, Y. Liu, Y. Lu, and X. Li, “Shear transfer mechanism of perforated web connection for concrete encased steel structures,” Eng Struct, vol. 252, p. 113418, 2022.

Downloads

Published

2026-11-14

How to Cite

Shamki, Alaa A., and Majid D. Muttashar. “SHEAR BEHAVIOR OF CONCRETE BEAMS REINFORCED WITH STRUCTURALLY ENGINEERED STEEL PLATES”. Kufa Journal of Engineering, vol. 17, no. 4, Nov. 2026, pp. 89-102, https://doi.org/10.30572/2018/KJE/170406.

Share