Flexural Behaviour and Ductility of High-Strength Concrete Beams Reinforced with Hybrid BFRP-Steel Bars

Authors

  • Haider M. Aziz M.Sc. Student, Dept. of Civil Engineering, College of Engineering, Mustansiriyah University, Baghdad, Iraq
  • Hassan F. Hassan Professor, Dept of Civil Engineering, College of Engineering, Mustansiriyah University, Baghdad, Iraq

DOI:

https://doi.org/10.30572/2018/KJE/170419

Keywords:

Flexural Behaviour, FRP, High-Strength Concrete, Hybrid Reinforcing, Ductility

Abstract

This study investigates the flexural performance of high-strength concrete beams reinforced with hybrid basalt fibre-reinforced polymer (BFRP) and steel bars. Six beams were tested under four-point bending, including four with varying BFRP-to-steel ratios and two reference beams reinforced solely with steel and BFRP, respectively. The main variable was the reinforcement proportion. The experimental program evaluated load-bearing capacity, midspan deflection, crack width, and ductility. Compared to the BFRP-only beam, hybrid specimens exhibited up to 16.2% higher ultimate load and 29% lower deflection, while ductility indices ranged from 1.62 to 2.71, depending on reinforcement configuration. Crack width and deflection predictions from ACI 440.1R-15, CSA S806-12, and the Bischoff model were found to overestimate experimental values by 20–35%, highlighting the need for refinement in existing models. Results confirm that hybrid reinforcement effectively enhances strength, deformation capacity, and serviceability, offering a viable approach to improving the ductility and crack control of high-strength concrete members

Downloads

Download data is not yet available.

References

American Concrete Institute,363R-10, A. (2010). Report on High-Strength Concrete (ACI 363R-10), ACI.

American Concrete Institute, ACI-318R-19 (2019). Building Code Requirements for Structural Concrete ACI 318-19 and Commentary 318R–19, Farmington Hills, MI, USA, American Concrete Institute.

Aiello, M. A. & Ombres, L. (2002). Structural performances of concrete beams with hybrid (fiber-reinforced polymer-steel) reinforcements. Journal of Composites for Construction, 6, 133-140..doi/abs/10.1061/(ASCE)1090-0268(2002)6:2(133)

Alshadidi, R. M., Hassan, H. F. & Mohammed, M. H. (2016). Shear behavior of high strength concrete beams reinforced with GFRP bars and strengthened by CFRP sheets. Journal of Engineering and Sustainable Development, 20, 102-117.

Al-Turaihi, A.A.A. & Al-Katib, H.A.A. (2024). Behavior of hybrid reinforced concrete beams on flexural strength. Kufa Journal of Engineering, 15(1), 27–38. https://doi.org/10.30572/2018/kje/150203

Araba, A. M. & Ashour, A. F. (2018). Flexural performance of hybrid GFRP-Steel reinforced concrete continuous beams. Composites Part B: Engineering, 154, 321-336..https://doi.org/10.1016/j.compositesb.2018.08.077

Benmokrane & Masoudi (1996). Flexural response of concrete beams reinforced with FRP reinforcing bars. Structural Journal, 93, 46-55.DOI: 10.14359/9839

Bischoff, P. H. (2005). Reevaluation of deflection prediction for concrete beams reinforced with steel and fiber reinforced polymer bars. Journal of structural engineering, 131, 752-767.doi/abs/10.1061/(ASCE)0733-9445(2005)131:5(752)

Bischoff, P. H. & Scanlon, A. (2007). Effective moment of inertia for calculating deflections of concrete members containing steel reinforcement and fiber-reinforced polymer reinforcement. ACI Structural Journal, 104, 68.

El refai, A., Abed, F. & AL-rahmani, A. (2015). Structural performance and serviceability of concrete beams reinforced with hybrid (GFRP and steel) bars. Construction and Building Materials, 96, 518-529.https://doi.org/10.1016/j.conbuildmat.2015.08.063

Ftnan, A.H. & Makki, R.F. (2022). Behavior of recycled aggregate concrete beams strengthened with FRP. Kufa Journal of Engineering, 13(1), 13–24. https://doi.org/10.30572/2018/KJE/130402

Garden, H. & Hollaway, L. (1998). An experimental study of the influence of plate end anchorage of carbon fibre composite plates used to strengthen reinforced concrete beams. Composite structures, 42, 175-188.https://doi.org/10.1016/S0263-8223(98)00070-1

Ge, W., Zhang, J., Cao, D. & Tu, Y.( 2015). Flexural behaviors of hybrid concrete beams reinforced with BFRP bars and steel bars. Construction and Building Materials, 87, 28-37.https://doi.org/10.1016/j.conbuildmat.2015.03.113

Guo, X., Jin, Z. & Xiong, C. (2025). Basalt/carbon-based hybrid FRP bar: Optimised design and mechanical properties. Case Studies in Construction Materials, 28, e04994. https://doi.org/10.1016/j.cscm.2025.e04994

Hollaway, L. (2010). A review of the present and future utilisation of FRP composites in the civil infrastructure with reference to their important in-service properties. Construction and building materials, 24, 2419-2445..https://doi.org/10.1016/j.conbuildmat.2010.04.062

Htet, P., Chen, W., Huang, Z. & Hao, H. (2024). Flexural behaviour of hybrid fibre-reinforced recycled aggregate concrete beams with BFRP bars and steel–BFRP composite bars (SBCBs). Structures, 65, 107481. https://doi.org/10.1016/j.istruc.2024.107481

Hussein, A., Huang, H., Okuno, Y. & Wu, Z. (2022). Experimental and numerical parametric study on flexural behavior of concrete beams reinforced with hybrid combinations of steel and BFRP bars. Composite Structures, 302, 116230. https://doi.org/10.1016/j.compstruct.2022.116230

(JSCE), J. S. O. C. E. (1997). Recommendation for Design and Construction of Concrete Structures using Continuous Fiber Reinforcing Materials. Concrete Engineering Series. Tokyo, Japan.

Kara, I. F., Ashour, A. F. & Koroglu, M. A. (2015). Flexural behavior of hybrid FRP/steel reinforced concrete beams. Composite Structures, 129, 111-121..https://doi.org/10.1016/j.compstruct.2015.03.073

Khalid, N., Shallal, M., Naji, H. & Hasson, A. (2025). An experimental investigation on improving the bond behavior of glass fiber reinforced polymer bars in concrete. Kufa Journal of Engineering, 16(1), 81–95. https://doi.org/10.30572/2018/KJE/160205

Liu, S., Wang, X., Ali, Y., Huang, H. & Wu, Z. (2024a). Evaluation of Deflection Calculation for Hybrid-Reinforced Concrete with Fiber-Reinforced Polymer and Steel Bars. ACI Structural Journal, 121..DOI:https://doi.org/10.46604/aiti.2021.7330

Liu, S., Wang, X., Ali, Y. M., Su, C. & Wu, Z. (2022). Flexural behavior and design of under-reinforced concrete beams with BFRP and steel bars. Engineering Structures, 263, 114386.https://doi.org/10.1016/j.engstruct.2022.114386

Liu, S., Wang, X., Ali, Y. M., Su, C. & Wu, Z. (2023). Flexural performance and design of concrete beams reinforced with BFRP and steel bars. Journal of Composites for Construction, 27, 04023062.

Liu, S., Wang, X., Ding, L., Zhong, B., Huang, H. & Wu, Z. (2024b). Post-yielding deflection calculation of flexural hybrid reinforced concrete with a combination of fiber reinforced polymer and steel bars. Advances in Structural Engineering, 27, 2067-2082.doi/abs/10.1177/13694332241260135

Lu, C., Li, H., Xu, K., Xuan, G. & Abdullah, W.(2020) Experimental study of flexural behavior and serviceability of hybrid concrete beams reinforced by steel and G/BFRP bars. IOP Conference Series: Materials Science and Engineering, IOP Publishing, 012007.DOI 10.1088/1757-899X/770/1/012007

Manan, A., Zhang, P., Ahmad, S. & Ahmad, J. (2024). Optimizing hybrid fibre-reinforced polymer bars design: A machine learning approach. Journal of Polymer Materials, 41, 77–https://90. 10.32604/jpm.2024.053859

Mohammed, O. A., AL hawat W. & Keshawarz, M. (2021). Durability and mechanical properties of concrete reinforced with basalt fiber-reinforced polymer (BFRP) bars: Towards sustainable infrastructure. Polymers, 13, 1402. https://doi.org/10.3390/polym13091402

Moolaei, S., Sharbatdar, M. K. & Kheyroddin, A. (2021). Experimental evaluation of flexural behavior of HPFRCC beams reinforced with hybrid steel and GFRP bars. Composite Structures, 275, 114503.https://doi.org/10.1016/j.compstruct.2021.114503

Nguyen, P. D., Dang, V. H. & Vu, N. A. (2020). Performance of concrete beams reinforced with various ratios of hybrid GFRP/steel bars. Civil Engineering Journal, 6, 1652-1669.https://doi.org/10.28991/cej-2020-03091572

Pang, L., Qu, W., Zhu, P. & Xu, J. (2016). Design propositions for hybrid FRP-steel reinforced concrete beams. Journal of Composites for Construction, 20, 04015086.doi/abs/10.1061/(ASCE)CC.1943-5614.0000654

Qin, R., Zhou, A. & Lau, D. (2017). Effect of reinforcement ratio on the flexural performance of hybrid FRP reinforced concrete beams. Composites Part B: Engineering, 108, 200-209.https://doi.org/10.1016/j.compositesb.2016.09.054

Qu, W., Zhang, X. & Huang, H. (2009). Flexural behavior of concrete beams reinforced with hybrid (GFRP and steel) bars. Journal of Composites for construction, 13, 350-359.https://doi.org/10.1016/j.engstruct.2022.114386

Sun, Z., Fu, L., Feng, D.-C., Vatulika, A. R., Wei, Y. & Wu, G. (2019). Experimental study on the flexural behavior of concrete beams reinforced with bundled hybrid steel/FRP bars. Engineering Structures, 197, 109443..https://doi.org/10.1016/j.engstruct.2019.109443

Vu, H. D. & Phan, D. N. (2021). Experimental and theoretical analysis of cracking moment of concrete beams reinforced with hybrid fiber reinforced polymer and steel rebars. Advances in Technology Innovation, 6, 222.DOI: https://doi.org/10.46604/aiti.2021.7330

Wang, X., Liu, S., Shi, Y., Wu, Z. & He, W. (2022). Integrated high-performance concrete beams reinforced with hybrid BFRP and steel bars. Journal of Structural Engineering, 148, 04021235.doi/abs/10.1061/%28ASCE%29ST.1943-541X.0003207

Xing, L., Sun, S., Mei, K., Guo, Y. & Yang, Z. (2024). Research progress on short-term mechanical properties of FRP bars and FRP-reinforced concrete beams. Journal of Traffic and Transportation Engineering (English Edition), 11, 245–270. https://doi.org/10.1016/j.jtte.2023.12.007

Xue, W., Peng, F. & Zheng, Q. (2016). Design equations for flexural capacity of concrete beams reinforced with glass fiber–reinforced polymer bars. Journal of Composites for Construction, 20, 04015069.doi/abs/10.1061/(ASCE)CC.1943-5614.0000630

Yang, Y., Sun, Z.-Y., Wu, G., Cao, D.-F. & Zhang, Z.-Q. (2020). Flexural capacity and design of hybrid FRP-steel-reinforced concrete beams. Advances in Structural Engineering, 23, 1290-1304.doi/abs/10.1177/1369433219894236

Yoon, Y.-S., Yang, J.-M., Min, K.-H. & Shin, H.-O. (2011). Flexural strength and deflection characteristics of high-strength concrete beams with hybrid FRP and steel bar reinforcement. Special Publication, 275, 1-22.

Zhang, A., Fan, X.C., Gao, X. & Ge, T. (2024). Flexural behavior of BFRP bar–hybrid steel fiber reinforced UHPC beams. Structures, 65, 106838. https://doi.org/10.1016/j.istruc.2024.106838

American Concrete Institute, ACI-440.1R-06 (2006). Guide for the Design and Construction of Concrete Reinforced with FRP Bars. Detroit, Michigan.

American Concrete Institute ACI-440.1R-15 (2015). Guide for the design and construction of structural concrete reinforced with FRP bars. American Concrete Institute (ACI). ACI 440.1R-15 ed. Farmington Hills, MI, USA.

Canadian Standards Association. CAN/CSA-S806-12 (2012). Design and Construction of Building Structures with Fiber Reinforced Polymers (CAN/CSA), Rexdale, ON, Canada, Canadian Standards Association.

Canadian Standards Association. CAN/CSA-S6-14,(2014) "Canadian highway bridge design code," CAN/CSA-S6-14.

American Concrete Institute,440.11-22, A. (2022). Building Code Requirements for Structural Concrete Reinforced with Glass Fiber-Reinforced Polymer (GFRP) Bars – Code and Commentary, American Concrete Institute.

Downloads

Published

2026-11-14

How to Cite

Aziz, Haider M., and Hassan F. Hassan. “Flexural Behaviour and Ductility of High-Strength Concrete Beams Reinforced With Hybrid BFRP-Steel Bars”. Kufa Journal of Engineering, vol. 17, no. 4, Nov. 2026, pp. 323-46, https://doi.org/10.30572/2018/KJE/170419.

Share