COMPARATIVE STUDY ON THE EFFECT OF FINE VERSUS COARSE PEARLITE ON SPHEROIDIZATION AND MECHANICAL PROPERTIES IN ANNEALED 80C6 STEEL

Authors

  • Patel Kishan Jayantibhai Research scholar, Mechanical Engineering Department, Gujarat Technological University, Ahmedabad, India
  • D.B. Jani Associate Professor, Mechanical Engineering Department, Government Engineering College, Bhavnagar, India

DOI:

https://doi.org/10.30572/2018/KJE/170412

Keywords:

Coarse Pearlite, Fine Pearlite, Microstructure, Mechanical properties, Pearlite, Spheroidization annealing

Abstract

The present work examines the influence of initial pearlite morphology (fine or coarse) on spheroidizing annealing characteristics and mechanical properties of 80C6 eutectoid steel. Sample A (fine pearlite with cementite lamellar spacing of 0.25 μm) and Sample B (coarse pearlite with cementite lamellar spacing of 0.52 μm), with varying interlamellar spacings, were treated with a specially designed spheroidizing anneal cycle at 705°C for 35 hours, holding in a nitrogen inert gas atmosphere, followed by controlled cooling in a bell annealing furnace. This treatment converts lamellar cementite to spheroidized cementite for the purpose of improving ductility. Microstructural examination by optical microscopy, SEM, and Quantimet image analysis software revealed that fine  pearlite spheroidized faster with 65% spheroidization accompanied by small carbides (4–6 µm), whereas coarse pearlite spheroidized only up to 50% with larger spheroids (6–8 µm). Mechanical testing also indicated that spheroidization decreased hardness and strength but increased ductility. The finer pearlite sample showed a superior equilibrium (UTS 566 MPa, YS 457 MPa, elongation 21%, and hardness 168 HV) than the coarse pearlite sample (UTS 555 MPa, YS 398 MPa, elongation 18%, and hardness 155 HV).These results confirm that pearlite fineness is regulated prior to annealing to enhance the spheroidization efficiency and mechanical properties. This bestows genuine benefits for use in the automotive, bearing, and tool steels industries

Downloads

Download data is not yet available.

References

Alcántara, V. (2021) ‘Spheroidizing in steels: processes, mechanisms, kinetic and microstructure – A review’, IOSR Journal of Mechanical and Civil Engineering, 26, 52–70.

Amin, R. R., Amin, H. F., Khwakaram, A. I., Mahmood, O. S., & Karim, P. M. (2025). Effect of brine quenchants and precipitation hardening on the mechanical properties of aluminium alloy (AA6061). Kufa Journal of Engineering, 16(3), 101–111, available: https://doi.org/10.30572/2018/KJE/160307

Bhadeshia, H.K.D.H. (2021) Theory of Transformations in Steels. CRC Press.

Callister, W.D. Jr. and Rethwisch, D.G. (2018) Fundamentals of Materials Science and Engineering: An Integrated Approach, 3rd edn. Hoboken, NJ: John Wiley, p. 385.

Cheng, J., Lei, W. and Zhu, M.-Y. (2015) ‘Effect of subcritical annealing temperature on microstructure and mechanical properties of SCM435 steel’, Journal of Iron and Steel Research International, 22(11), 1031–1036, available: https://doi.org/10.1016/S1006-706X(15)30108-4.

Elwazri, A.M., Wanjara, P. and Yue, S. (2005) ‘The effect of microstructural characteristics of pearlite on the mechanical properties of hypereutectoid steel’, Materials Science and Engineering: A, 404, 91–98, available: https://doi.org/10.1016/j.msea.2005.05.051.

Ghaleb, A. A., & Ahmed, M. N. (2025). Root cause analysis of the most frequently occurring problems in the Iraqi building industry through Fishbone diagram. Kufa Journal of Engineering, 16(2), 314–327, available: https://doi.org/10.30572/2018/KJE/160219.

Hoseiny, H., Caballero, F.G., M’Saoubi, R., Högman, B., Weidow, J. and Andrén, H.O. (2015) ‘The influence of heat treatment on the microstructure and machinability of a prehardened mold steel’, Metallurgical and Materials Transactions A, 46, 1–12, available: http://dx.doi.org/10.1007/s11661-015-2789-4.

Huo, J., Zhou, C. and Wang, H. (2018) ‘The spheroidizing tendency and spheroidization mechanism of 75Cr1 steel’, MATEC Web of Conference, available: https://doi.org/10.1051/matecconf/201824201009.

Krauss, G. (2005) Steels – Processing, structure, and performance. ASM International, available: https://doi.org/10.31399/asm.tb.spsp2.9781627082655.

Li, Y., Chen, C., Fan, Z., Jiang, D., Shuai, S., Tu, T. and Ren, Z. (2024) ‘Effects of cooling rate on isothermal spheroidizing annealing of hot-rolled GCr15 bearing steel’, Journal of Materials Research and Technology, 31, 329–337, available: https://doi.org/10.1016/j.jmrt.2024.06.060.

Lü, Z.-Q., Zhang, H.-F., Meng, Q., Wang, Z.-H. and Fu, W.-T. (2016) ‘Effect of cyclic annealing on microstructure and mechanical properties of medium carbon steel’, Journal of Iron and Steel Research International, 23(2), 145–150, available: https://doi.org/10.1016/S1006-706X(16)30026-7.

Ma, X., Chu, X., Yang, Y., Lu, H., Wang, W. and Zhao, Z. (2024) ‘Influence of annealing and aging parameters on the microstructure and properties of 1200 MPa grade cold-rolled dual-phase steel’, Materials, 17, 4933, available: https://doi.org/10.3390/ma17194933.

Nikiel, P., Szczepanik, S. and Korpała, G. (2021) ‘Accelerated spheroidization of cementite in sintered ultrahigh carbon steel by warm deformation’, Metals, 11, 1–12, available: https://doi.org/10.3390/met11020328.

Nutal, N., Gommes, C., Silvia, B., Pouteau, P., Pirard, J.-P., Boschini, F., Traina, K. and Cloots, R. (2010) ‘Image analysis of pearlite spheroidization based on the morphological characterization of cementite particles’, Image Analysis and Stereology, 29, 91–98, available: https://doi.org/10.5566/ias.v29.p91-98.

Offerman, S., van Dijk, N., Rekveldt, M., Sietsma, J. and Zwaag, S. (2002) ‘Ferrite/pearlite band formation in hot rolled medium carbon steel’, Materials Science and Technology, 18, 297–303, available: http://dx.doi.org/10.1179/026708301225000752.

Páez, J.R., Dorronsoro, A., Martínez-Esnaola, J.M., Sevillano, J.G. and Alkorta, J. (2024) ‘A microstructure-based constitutive model for eutectoid steels’, Acta Materialia, 263, 119533, available: https://doi.org/10.1016/j.actamat.2023.119533.

Qin, F., Lv, T., Li, Y., Zhao, X., Chen, H. and Li, R. (2024) ‘Static recrystallization behavior and twin formation mechanism of Fe–Mn–Cr–N steel during medium temperature annealing’, Metallurgical and Materials Transactions A, 56, 228–240, available: http://dx.doi.org/10.1007/s11661-024-07646-8.

S. J. Hassan, B. Al-Zubaidy, and S. H. Al-Shafaie, “Study the effect of zirconium, nickel and heat-treatments on the microstructure and mechanical properties of cold-rolled AA6111 alloy,” Kufa Journal of Engineering, vol. 16, no. 3, pp. 120–134, 2025, available: https://doi.org/10.30572/2018/KJE/160110

Szala, M., Winiarski, G., Wójcik, Ł. and Bulzak, T. (2020) ‘Effect of annealing time and temperature parameters on the microstructure, hardness, and strain-hardening coefficients of 42CrMo4 steel’, Materials, 13, 92022, available: https://doi.org/10.3390/ma13092022.

Umar, M., Qayyum, F., Farooq, M.U., Khan, L.A., Guk, S. and Prahl, U. (2021) ‘Investigating the effect of cementite particle size and distribution on local stress and strain evolution in spheroidized medium carbon steels using crystal plasticity-based numerical simulations’, Steel Research International, 92, 1–13, available: https://doi.org/10.1002/srin.202000407.

Verhoeven, J.D. and Gibson, E.D. (1998) ‘The divorced eutectoid transformation in steel’, Metallurgical and Materials Transactions A, 29, 1181–1189, available: https://doi.org/10.1007/s11661-998-0245-4.

Wang, S., Cao, L. and Zhang, Z., 2019. Influence of carbide morphology on the deformation and fracture mechanisms of spheroidized 14CrMoR steel. Metals, 9(11), p.1221, available: https://doi.org/10.3390/met9111221

Zhu, S., Zhen, X., Wang, G., Ma, C. and Cao, C. (2023) ‘Effect of SCM435 initial microstructure and annealing process on spheroidization grade and properties’, Vibroengineering PROCEDIA, 48, 61–66, available: https://doi.org/10.21595/vp.2022.23091.

Downloads

Published

2026-11-14

How to Cite

Jayantibhai, Patel Kishan, and D.B. Jani. “COMPARATIVE STUDY ON THE EFFECT OF FINE VERSUS COARSE PEARLITE ON SPHEROIDIZATION AND MECHANICAL PROPERTIES IN ANNEALED 80C6 STEEL”. Kufa Journal of Engineering, vol. 17, no. 4, Nov. 2026, pp. 200-14, https://doi.org/10.30572/2018/KJE/170412.

Share