FLEXURAL BEHAVIOR OF NC AND UHPC-RC BEAM STRENGTHENING VIA CFRP ON GROOVES
DOI:
https://doi.org/10.30572/2018/KJE/170413Keywords:
CFRP, UHPC, Compressive strength, EBR and EBROGAbstract
This study investigates the flexural performance of ultra-high-performance concrete (UHPC) - reinforced concrete beams strengthened by carbon fiber reinforced polymer (CFRP) on the groove. Three concrete compressive strengths were employed to this end. Ten beam specimens were strengthened via CFRP using external bonded reinforcement on grooves (EBROG) and external bonded reinforcement (EBR), and tested under three-point loading to investigate the influence of differing concrete compressive strengths, and the presence of a UHPC layer at the tension face of the beam of different thicknesses (2 cm or 5 cm). In this study, the flexural capacity, deflection, crack behavior, and failure modes were examined. The beams were categorized according to the strengthening technique: EBROG, EBR, and a control beam specimen. The results showed a significant improvement in the flexural strength of RC beams strengthened with CFRP. The increase in load-carrying capacity was 51.6% for the beam strengthened via the EBR method and 90% for the beam strengthened via EBROG method, as compared to the control beam. In the same manner, the increase in load-carrying capacity was 120% and 140% for beams strengthened by CFRP using EBROG and where the concrete at the tension face was replaced with UHPC with thicknesses of 2 cm 5 cm, respectively. Increasing the compressive strength from 30 MPa to 45 MPa led to an increase in the load carrying capacity of 23.2%. The addition of transverse grooves to the longitudinal grooves in the EBROG method led an improved load-carrying capacity of 22%
Downloads
References
Al-Abdwais, A. and Al-Mahaidi, R. (2016) 'Modified cement-based adhesive for near-surface mounted CFRP strengthening system', Construction and Building Materials, 124, pp. 794–800. https://doi.org/10.1016/j.conbuildmat.2016.09.142
Al-Bayati, G. and Al-Mahaidi, R. (2014) 'Effective bond length of modified cement-based adhesive for FRP-NSM strengthening system', in 23rd Australasian Conference on the Mechanics of Structures and Materials, Byron Bay, 9–12 December, pp. 389–396.
Bosnia and Herzegovina (2018) 'High-strength concrete (HSC) material for high-rise buildings.
DeLorenzis, L. and Teng, J.G. (2007) 'Near-surface mounted FRP reinforcement: An emerging technique for strengthening structures', Composites Part B: Engineering, 38(2), pp. 119–143. https://doi.org/10.1016/j.compositesb.2006.08.003
El-Gamal, S.E., Al-Salloum, Y., Alsayed, S. and Aqel, M. (2012) 'Performance of near surface mounted GFRP bars in concrete', Journal of Reinforced Plastics and Composites, 31(22), pp. 1501–1515. https://doi.org/10.1177/0731684412464088
El-Hacha, R. and Rizkalla, S.H. (2004) 'Near-surface-mounted fiber-reinforced polymer reinforcements for flexural strengthening of concrete structures', Structural Journal, 101(5), pp. 717–726. https://www.concrete.org/publications/internationalconcreteabstractsportal/m/details/id/13394
Kalfat, R. and Al-Mahaidi, R. (2010) 'Investigation into bond behaviour of a new CFRP anchorage system for concrete utilising a mechanically strengthened substrate', Composite Structures, 92(11), pp. 2738–2746. https://doi.org/10.1016/j.compstruct.2010.04.022
Khalifa, A.M. (2016) 'Flexural performance of RC beams strengthened with near surface mounted CFRP strips', Alexandria Engineering Journal, 55, pp. 1497–1505. https://doi.org/10.1016/j.aej.2016.01.033
Mashrei, M., Makki, J. and Sultan, A.A. (2019) 'Flexural strengthening of reinforced concrete beams using carbon fiber reinforced polymer (CFRP) sheets with grooves', Latin American Journal of Solids and Structures, 16, pp. 1–13. https://doi.org/10.1590/1679-78255930
McDonagh, M., & Sakellos, G. (2024). Sprayable UHPC for repair and preservation. FHWA-HRT-24-118, Turner-Fairbank Highway Research Center, Federal Highway Administration, U.S. Department of Transportation. https://doi.org/10.21949/1521565.
Nurbaiah, M.N., Hanizah, A.H. and Farhana, I.N. (2014) 'Flexural behavior of reinforced concrete (RC) beams with externally bonded (EB) carbon fiber reinforced polymer (CFRP) sheets', in InCIEC 2013, Singapore: Springer, 14 January, pp. 637–648.
Qadir, H.H., Faraj, R.H., Sherwani, A.F.H., Mohammed, B.H. and Younis, K.H. (2020) 'Mechanical properties and fracture parameters of ultra-high performance steel fiber reinforced concrete composites made with extremely low water per binder ratio.
Riyam, J.A., Mashrei, M.A. and Sultan, A.A. (2022) 'Flexural behavior of reinforced concrete beams strengthened by carbon fiber reinforced polymer using different strengthening techniques.
Sarmad. S. Abdulqader, Makki R. F, & Mohammed W. Musa. (2018). Behavior of SCC beams strengthened with CFRP under shear. Kufa Journal of Engineering, 9(1), 1–16. https://doi.org/10.30572/2018/kje/100109
Sarsam, K. F., Al-Mishhadani, S. A., & Al-Habbobi, A. M. (2014). Evaluation of the shear strength of fibrous reactive powder concrete beams strengthened with CFRP strips. Kufa Journal of Engineering, 5(1), 1–16.
Shakir, Q. M., Yahya, Y. M., & Jasim, A. T. (2018). Strengthening of reinforced self-compacting concrete T-deep beam with large opening by carbon fiber sheets. Kufa Journal of Engineering, 9(2), 1–18. https://doi.org/10.30572/2018/kje/100206
Zeng, J.-J., Hao, Z.-H., Sun, H.-Q. and Zhuge, Y. (2024) 'Durability assessment of ultra-high-performance concrete (UHPC) and FRP grid-reinforced UHPC plates under marine environments.
Zhang, S.S., Teng, J.G. and Yu, T. (2013) 'Bond-slip model for CFRP strips near-surface mounted to concrete', Engineering Structures, 56, pp. 945–953. https://doi.org/10.1016/j.engstruct.2013.05.022
Downloads
Published
Issue
Section
Categories
License
Copyright (c) 2026 Amjed Aneed Maid, Mohammed A. Mashrei

This work is licensed under a Creative Commons Attribution 4.0 International License.












