EXPERIMENTAL AND ANALYTICAL ASSESSMENT OF REINFORCED CONCRETE BEAMS STRENGTHENED USING NEAR-SURFACE MOUNTED BASALT FRP BARS

Authors

  • Saif Hallem Muhsin Al-Yasiri Department of Civil Engineering, College of Engineering, Mustansiriyah University, Baghdad, Iraq
  • Nibras Nizar Khalid Department of Civil Engineering, College of Engineering, Mustansiriyah University, Baghdad, Iraq

DOI:

https://doi.org/10.30572/2018/KJE/170438

Keywords:

NSM-BFRP, Reinforced Concrete Beams, Structural Performance, Load-Carrying Capacity, Ductility, Hybrid Reinforcement, Flexural behavior

Abstract

The strengthening of reinforced concrete (RC) beams using near-surface mounted basalt fiber-reinforced polymer (NSM-BFRP) bars has emerged as an effective strategy to enhance flexural performance and structural safety without increasing member dimensions. In this research, eight RC beams were examined experimentally and analytically to evaluate the influence of steel reinforcement ratio and hybrid steel-BFRP configurations in structural performance. Control beams with conventional steel reinforcement exhibited ultimate loads ranging from 40.87 kN to 110.97 kN, with higher reinforcement ratios providing increased stiffness and reduced curvature at failure. Beams strengthened with NSM-BFRP bars demonstrated substantial improvements in both ultimate load and ductility: lightly reinforced beams strengthened with two NSM-BFRP bars achieved an 85% increase in load capacity, while moderately reinforced beams strengthened with larger-diameter NSM-BFRP bars reached up to 104.33 kN. Moment-curvature analysis confirmed that NSM-BFRP strengthening enhanced flexural capacity without compromising ductile failure mechanisms. Analytical predictions using ACI 440.2R-08 were conservative, underestimating the experimental ultimate loads by 9-11%, particularly for hybrid NSM-BFRP beams. The findings demonstrate that NSM-BFRP strengthening effectively improves both flexural strength and deformation capacity, offering a reliable solution for upgrading existing RC structures while maintaining ductility without compromising structural safety

Downloads

Download data is not yet available.

References

Abadel, A. (2024) 'Shear strengthening of deficient RC deep beams using NSM FRP system: Experimental and numerical investigation', Materials Science Poland, 42(1), pp. 140-157.

Achillopoulou, D.V., Kosta, A., Stamataki, N.K., Montalbano, A. and Choffat, F. (2024) 'Efficiency of CFRP Strengthening Measures for Reinforced Concrete Structural Members Using Toughened Epoxies', Construction Materials, 4(1), pp. 173-193.

Achillopoulou, D.V., Montalbano, A. and Choffat, F. (2021) 'Interface response of CFRP fabrics for concrete substrates enhanced with toughened epoxy adhesive layers', International Conference on Fibre-Reinforced Polymer (FRP) Composites in Civil Engineering, Springer, pp. 1632-1644.

Ahmed, S., Sharaky, I.A., Ibrahim, Y.E. and Abdo, A. (2023) 'Flexural response of GFRP RC beams strengthened with side and bottom NSM GFRP bars', Case Studies in Construction Materials, 18, e01858.

Ahmed, T., Bediwy, A. and Islam, M.J. (2025) 'Durable and sustainable nano-modified basalt fiber-reinforced composites for elevated temperature applications', Journal of Building Engineering, 112865.

Alabtah, F.G., Mahdi, E. and Eliyan, F.F. (2021) 'The use of fiber reinforced polymeric composites in pipelines: A review', Composite Structures, 276, 114595.

Ali, A. and Haider, M. (2023) 'Effect of strengthening the hybrid reinforced concrete beams using a near-surface strengthening technique on flexural behavior', AIP Conference Proceedings, 3249(1), 020016.

Al-Katib, H.A.A. and AL-Turaihi, A.A.A. (2024) 'Behavior of hybrid reinforced concrete beams on flexural strength', Kufa Journal of Engineering, 15(2), pp. 27-38.

Al-Nsour, R., Abdel-Jaber, M.T., Ashteyat, A. and Shatarat, N. (2023) 'Flexural repairing of heat damaged reinforced concrete beams using NSM-BFRP bars and NSM-CFRP ropes', Composites Part C: Open Access, 12, 100404.

Al-Tamimi, A., et al. (2023) 'Flexural behavior of reinforced concrete beams strengthened with hybrid steel-FRP reinforcements by using near surface mounted technique', Journal of Applied Engineering Science, 21(3), pp. 758-766.

Al-Zu’bi, M.I. (2023) Nanotechnology-Enhanced Near-Surface Mounted-Fibre Reinforced Polymers (NSM-FRP) Structural Retrofitting, Doctoral dissertation, Brunel University London.

Aziz, H.M. and Hassan, H.F. (2026) 'Statistical evaluation of the flexural moment capacity of beams reinforced with FRP and hybrid FRP-steel reinforcement', Kufa Journal of Engineering, 17(1), pp. 622-641.

Badawi, M. and Soudki, K. (2009) 'Fatigue behavior of RC beams strengthened with NSM CFRP rods', Journal of Composites for Construction, 13(5), pp. 415-421.

Barris, C., Baena, M., Jahani, Y., Codina, A. and Torres, L. (2023) 'Experimental study on flexural cracking and deformation of reinforced-concrete beams strengthened with NSM FRP reinforcement', Journal of Composites for Construction, 27(2), 04023006.

Bencardino, F., Condello, A. and Ombres, L. (2016) 'Numerical and analytical modeling of conc. beams with steel, FRP and hybrid FRP-steel reinforcements', Composite Structures, 140, pp. 53-65.

Bilotta, A., Ceroni, F., Di Ludovico, M., Nigro, E., Pecce, M. and Manfredi, G. (2011) 'Bond efficiency of EBR and NSM FRP systems for strengthening concrete members', Journal of Composites for Construction, 15(5), pp. 757-772.

Bunsell, A.R. (2018) Handbook of properties of textile and technical fibres, Woodhead Publishing, pp. 805-840.

Coelho, M.R., Sena-Cruz, J.M. and Neves, L.A. (2015) 'A review on the bond behavior of FRP NSM systems in concrete', Construction and Building Materials, 93, pp. 1157-1169.

Diniță, A., Ripeanu, R.G., Ilincă, C.N., Cursaru, D., Matei, D., Naim, R.I. and Portoacă, A.I. (2023) 'Advancements in fiber-reinforced polymer composites: a comprehensive analysis', Polymers, 16(1), 2.

Effiong, J.U. and Ede, A.N. (2022) 'Experimental investigation on the strengthening of reinforced concrete beams using externally bonded and near-surface mounted natural fibre reinforced polymer composites—a review', Materials, 15(17), 5848.

El-Ghandour, A.A. (2011) 'Experimental and analytical investigation of CFRP flexural and shear strengthening efficiencies of RC beams', Construction and Building materials, 25(3), pp. 1419-1429.

Harle, S.M. (2024) 'Durability and long-term performance of fiber reinforced polymer (FRP) composites: A review', Structures, 60, 105881.

Hussein, A.A.M. (2023) Effect of Different Factors and Loadings Conditions on the RC Element Strengthened with Externally Bonded (EB) and Near Surface Mounted (NSM) Methods, Doctoral dissertation, Zagazig University.

Jagadeesh, P., Rangappa, S.M. and Siengchin, S. (2024) 'Basalt fibers: An environmentally acceptable and sustainable green material for polymer composites', Construction and Building Materials, 436, 136834.

Jasim, S. R., et al. (2025) 'An Experimental Study of the Flexural Performance of Hybrid Internally Reinforced Concrete Beams with Steel Bars, FRP Bars, Geogrid, and GFRP Mesh', Engineering, Technology & Applied Science Research, 15(2), 10504.

Ke, Y., Zhang, S.S., Nie, X.F., Yu, T., Yang, Y.M. and Jedrzejko, M.J. (2022) 'Finite element modelling of RC beams strengthened in flexure with NSM FRP and anchored with FRP U-jackets', Composite Structures, 282, 115104.

Kowalska, M., et al. (2025) 'Reinforced Concrete Beams with FRP and Hybrid Steel–FRP Composite Bars: Load–Deflection Response, Failure Mechanisms, and Design Implications', Materials, 18(18), 4381.

Megahed, F.A., Seleem, M.H., Badawy, A.A.M. and Sharaky, I.A. (2023) 'The flexural response of RC beams strengthened by EB/NSM techniques using FRP and metal materials: a state-of-the-art review', Innovative Infrastructure Solutions, 8(11), 289.

Mensah, C., Wang, Z., Bonsu, A.O. and Liang, W. (2020) 'Effect of different bond parameters on the mechanical properties of FRP and concrete interface', Polymers, 12(11), 2466.

Muciaccia, G., Khorasani, M. and Mostofinejad, D. (2022) 'Effect of different parameters on the performance of FRP anchors in combination with EBR-FRP strengthening systems: A review', Construction and Building Materials, 354, 129181.

Obaydullah, M. (2021) Strengthening of Prestressed Concrete Beams Using Combined Externally Bonded and Prestressed near Surface Mounted Technique, Doctoral dissertation, University of Malaya.

Rincon, L.F., Moscoso, Y.M., Hamami, A.E.A., Matos, J.C. and Bastidas-Arteaga, E. (2024) 'Degradation models and maintenance strategies for reinforced concrete structures in coastal environments under climate change: a review', Buildings, 14(3), 562.

Rizzo, A. and De Lorenzis, L. (2009) 'Modeling of debonding failure for RC beams strengthened in shear with NSM FRP reinforcement', Construction and Building Materials, 23(4), pp. 1568-1577.

Shallal, M.A., Khalid, N.N., Naji, H.F. and Hassoon, A. (2025) 'An experimental investigation on the improving the bond behavior of glass fiber reinforced polymer bars in concrete', Kufa Journal of Engineering, 16(2), pp. 81-95.

Soudki, K. and Alkhrdaji, T. (2005) 'Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures (ACI 440.2 R-02)', Structures Congress 2005, pp. 1-8.

Downloads

Published

2026-11-14

How to Cite

Al-Yasiri, Saif Hallem Muhsin, and Nibras Nizar Khalid. “EXPERIMENTAL AND ANALYTICAL ASSESSMENT OF REINFORCED CONCRETE BEAMS STRENGTHENED USING NEAR-SURFACE MOUNTED BASALT FRP BARS”. Kufa Journal of Engineering, vol. 17, no. 4, Nov. 2026, pp. 747-71, https://doi.org/10.30572/2018/KJE/170438.

Share