STRENGTHENING OF REINFORCED SELF-COMPACTING CONCRETE T- DEEP BEAM WITH LARGE OPENING BY CARBON FIBER SHEETS

Authors

  • Lecturer, PhD, Qasim M. Shakir Civil Engineering Department, College of Engineering, Kufa University, Iraq
  • MSc candidate, Yahya Mo. Yahya Civil Engineering department, Kufa University, Iraq
  • Lecturer, PhD, Ali T. Jasim Civil Engineering Department, College of Engineering, Kufa University, Iraq

DOI:

https://doi.org/10.30572/2018/KJE/100206

Keywords:

Self compacting concrete, Strengthening, Opening, Shear, Deflection, Flange deep beam

Abstract

This research based on experimental work included testing of thirteen specimens categorized into two groups. The first group included five beams: one is solid while the others are hollow beams with two openings of different sizes and locations. The second group included eight specimens strengthened with CFRP sheets in three systems to determine the best configuration of strengthening. The experimental results showed that the presence of openings (150*150) mm and (150*250) mm, which located flushed to the flange, led to a decrease in the load capacity by (43% and 64%) for the square and rectangular openings respectively. On the other hand, when the openings located in bottom location the reduction in capacity was found to be (48% and 70%) for the square and rectangular opening respectively. Also, the results of the test showed that the strengthening of the carbon strips led to improving in the structural capacity, where in the case of openings located flushed to the flange, there was an increased by (19% and 64%) for square and rectangular openings respectively. In contrary, in the case of opening located in the bottom location, the improvement in capacity was found to be (37% and 87%) for square and rectangular opening, respectively.

Downloads

Download data is not yet available.

Downloads

Published

2021-06-07

How to Cite

Shakir, Qasim, et al. “STRENGTHENING OF REINFORCED SELF-COMPACTING CONCRETE T- DEEP BEAM WITH LARGE OPENING BY CARBON FIBER SHEETS”. Kufa Journal of Engineering, vol. 10, no. 2, June 2021, pp. 76-89, doi:10.30572/2018/KJE/100206.

Similar Articles

1 2 3 4 5 6 7 8 9 10 11 12 > >> 

You may also start an advanced similarity search for this article.