Vol. 9 No. 2 (2018): April, 2018 - Kufa Journal of Engineering

Published: 2018-04-15

Peer-reviewed Articles

  • EFFECT OF SOAKING ON THE COMPACTION CHARACTERISTICS OF AL-NAJAF SAND SOIL

    PhD, Asst. Prof., Mohammed S. Mahmood
    1-12
    Abstract View: 94 , PDF Download: 96
    DOI: https://doi.org/10.30572/2018/KJE/090201

  • Influence of Oil Products on Strength and Durability of High Strength Latex Modified Concrete Coated by Epoxy

    Asst. Prof. Ameer G. Talib
    13-30
    Abstract View: 134 , PDF Download: 44
    DOI: https://doi.org/10.30572/2018/KJE/090202

  • AN EXPERIMENTAL STUDY FOR THE EFFECT OF CAPILLARY TUBE DIAMETER ON REFRIGERATOR PERFORMANCE WITH NEW ALTERNATIVE REFRIGERANT MIXTURE TO R134A

    Ali K. Al-Sayyab
    31-44
    Abstract View: 76 , PDF Download: 107
    DOI: https://doi.org/10.30572/2018/KJE/090203

  • DESTABILIZATION HEAT TREATMENT EFFECT ON EROSIVE WEAR CHARACTERISTICS OF HIGH CHROMIUM WHITE CAST IRON

    MSc. Student, Israa F. Yousif, Prof., Ali H. Ataiwi
    45-56
    Abstract View: 158 , PDF Download: 47
    DOI: https://doi.org/10.30572/2018/KJE/090204

  • CONVECTION HEAT TRANSFER IN A CHANNEL OF DIFFERENT CROSS SECTION FILLED WITH POROUS MEDIA

    Asst. Prof., Ahmed A. Mohammad Saleh, Lecturer, Suhad A. Rasheed, MSc. Student, Rafel B. Smasem
    57-73
    Abstract View: 96 , PDF Download: 74
    DOI: https://doi.org/10.30572/2018/KJE/090205

  • DESIGN OF DYNAMIC VOLTAGE RESTORER TO ENHANCE POWER QUALITY RELYING ON RENEWABLE SOURCE

    MSc., Haider M. Umran
    74-90
    Abstract View: 66 , PDF Download: 21
    DOI: https://doi.org/10.30572/2018/KJE/090206

  • USING LOCAL IRAQI MATERIALS IN PRODUCTION OF REFRACTORY BONDING MORTAR

    Asst. Ch. Eng., Katreen E. Al Hwaidy; Asst. Prof. Dr., Shatha S. Hassan; Lec. Dr., Osama A. Eedan
    91-102
    Abstract View: 107 , PDF Download: 0 , PDF Download: 117
    DOI: https://doi.org/10.30572/2018/KJE/090207

  • EXPERIMENTAL STUDY FOR GROUND TYPE EFFECT ON SOLAR CHIMNEY POWER PLANT

    Assistant professor, Mohammed H. Abbood , M.Sc. student, Mohammed R. Abbas
    103-113
    Abstract View: 97 , PDF Download: 45
    DOI: https://doi.org/10.30572/2018/KJE/090208

  • PID-LIKE FLC FOR FOUR CYLINDERS MEAN VALUE GASOLINE ENGINE MODEL IN IDLE MODE

    Assist. Prof. Dr., Mohammed Y. Hassan, M. Sc. Student, Muslim A. Abdali
    114-130
    Abstract View: 88 , PDF Download: 50
    DOI: https://doi.org/10.30572/2018/KJE/090209

  • DEVELOPMENT OF MICRO-HARDNESS AND WEAR PERFORMANCES OF BIOMEDICAL TITANIUM

    Mohsin T. Mohammed
    131-138
    Abstract View: 56 , PDF Download: 35
    DOI: https://doi.org/10.30572/2018/KJE/090210

  • VALIDITY OF GARBER MODEL IN PREDICTING PAVEMENT CONDITION INDEX OF FLEXIBLE PAVEMENT IN KERBALA CITY

    Professor Hussein A. Ewadh; Lecturer Raid R. A. Almuhanna; Formerly Postgraduate Student Saja J. M. Alasadi
    139-151
    Abstract View: 134 , PDF Download: 67
    DOI: https://doi.org/10.30572/2018/KJE/090211

  • FINITE ELEMENT ANALYSIS OF DEEP BEAM UNDER DIRECT AND INDIRECT LOAD

    Haleem K. Hussain
    152-167
    Abstract View: 205 , PDF Download: 49
    DOI: https://doi.org/10.30572/2018/KJE/090212

  • SUITABLE LOCATION OF SHEET PILE UNDER DAM RESTING ON SANDY SOIL WITH CAVITY

    Asst. Prof., Laith J. Aziz, MSc. Student, Marwa H. Abdallah
    168-188
    Abstract View: 100 , PDF Download: 56
    DOI: https://doi.org/10.30572/2018/KJE/090213

  • FINITE ELEMENT ANALYSIS OF BLANK DESIGN OPTIMAL TO PRODUCE A TRIANGLE CUP BY DEEP DRAWING PROCESS

    PhD, Shakir M. Aljabiri
    189-200
    Abstract View: 85 , PDF Download: 44
    DOI: https://doi.org/10.30572/2018/KJE/090214

  • ENHANCEMENT OF THE CORROSION RESISTANCE FOR 6009 ALUMINUM ALLOY BY LASER TREATMENT

    Asst. Prof, Abdulhadi K. Judran, Lecturer, Suad M. Kadhim, Hussain Abdul Elah
    201-2014
    Abstract View: 71 , PDF Download: 39
    DOI: https://doi.org/10.30572/2018/KJE/090215