A COMPARISON STUDY BETWEEN MODELING THE HEAT AFFECTED ZONE (HAZ) FOR THE LASER CUTTING OF TI-6AL-4V SHEETS BY USING THE ARTIFICIAL NEURAL NETWORK METHOD AND MULTI REGRESSION METHOD.
DOI:
https://doi.org/10.31257/2018/JKP/2020/120209Keywords:
Artificial Neural Network , CO2 laser , Heat Affected Zone, Multiple Regression AnalysisAbstract
This research presents an attempt to study the influence of laser cutting parameters which include Thickness, Lens Focal Length, Beam Power, Cutting Speed and Gas Pressure on the parameter of Heat Affected Zone (HAZ) width. Two predictive models have been developed using Artificial Neural Network (ANN) and multi regression modeling method. The relative importance of laser cutting parameters on (HAZ) width was determined based on (ANN) neuron weights and (ANOVA) method. The comparison between the experimental data with the predicted data indicated that the (ANN) model has attain accuracy of predicting (HAZ) upper than the multi regression model with a coefficient of determination (R2)=85.02%.
Downloads
Downloads
Published
How to Cite
Issue
Section
Categories
License
Copyright (c) 2023 Ekhlas Jabir Mahmood
This work is licensed under a Creative Commons Attribution 4.0 International License.
Journal of Kufa-Physics is licensed under the Creative Commons Attribution 4.0 International License, which allows users to copy, to create extracts, abstracts, and new works from the Article, to alter and revise the Article, and to make commercial use of the Article (including reuse and/or resale of the Article by commercial entities), provided the user gives appropriate credit (with a link to the formal publication through the relevant DOI), provides a link to the license, indicates if changes were made and the licensor is not represented as endorsing the use made of the work. The authors hold the copyright for their published work on the JKP website, while KJP is responsible for appreciating citation for their work, which is released under CC-BY-4.0 enabling the unrestricted use, distribution, and reproduction of an article in any medium, provided that the original work is properly cited.