The role of technological management in designing the production processAnalytical study in Ur Company for Engineering Industries
DOI:
https://doi.org/10.36325/ghjec.v22i2.20992Keywords:
Technological management, production process design, Ur General Company for Engineering Industries.Abstract
his research aims to understand the role of technological management in designing the production process at Ur General Company for Engineering Industries. Process design is one of the most important variables that require continuous development in industrial organizations in general, and therefore requires technological management capabilities to keep pace with development. Accordingly, a validated questionnaire was prepared to measure the study variables and distributed to a sample of 275 participants from the engineers and technicians of the cables and aluminum departments. The staff of these two departments represent the study population (after excluding departments unrelated to process design). After excluding questionnaires that were not suitable for statistical analysis, 260 questionnaires were used in the statistical analysis. A set of statistical tests were conducted using Smart PLS V.4, SPSS version 24, Excel 2016, and the study showed a significant positive impact of technological management on the design of the production process. In view of these results, they indicate the development of the role of technological management in the organization to ensure development and improvement in the design of the production process. One of the most important recommendations that were presented is the necessity of enhancing work according to technological management (more than it is) in the organization under study (Ur General Company for Engineering Industries) for the departments of cables and aluminum in order to enhance performance, speed, and productivity.
Downloads
References
1- مصطفى ناطق ناجي، تحديات التحول الرقمي وأثرها على الالتزام التنظيمي، دراسة تطبيقية في المعهد التقني الإداري/ الجامعة التقنية الوسطى، مجلة الغري للعلوم الاقتصادية والإدارية، المجلد 20 (عدد خاص) 2024، الصفحات 1758-1782
2- المرياني، م. ع. ح. هـ.، & السعداوي، ع. ج. ك. (2022). استعمال الكلفة المستهدفة والهندسة المتزامنة في تحسين جودة المنتوج وتخفيض التكاليف: دراسة تطبيقية في مصنع إطارات الديوانية. مجلة الغري لكلية الإدارة والاقتصاد، 18(1)، 304-322
1. Passalacqua, M., Pellerin, R., Magnani, F., Doyon-Poulin, P., Del-Aguila, L., Boasen, J., & Léger, P. M. (2025). Human-centred AI in industry 5.0: a systematic review. International Journal of Production Research, 63(7), 2638-2669.
2. Reed, G.. F., Lynn, F., & Meade, B. D. ((2002). , November). Use of coefficient of variation in assessing variability of quantitative assays. Clinical and Diagnostic Laboratory Immunology, 9(6), 1235-1239. https://pubmed.ncbi.nlm.nih.gov/12414755/
a multiple case study of Italian manufacturers." Information Systems Frontiers 25.3 995-1016
3. ADVANTAGE OF THE INDUSTRIAL BUSINESS SECTOR." International Journal of eBusiness and eGovernment Studies 16.1 (2024): 129-144.
4. Ahmad Zaidi, Mohamad Faizal, and Siti Norezam Othman. (2011) "Exploring the concept of technology management through dynamic capability perspective." International Journal of Business and Social Science 2.5 41-54
5. Ahmad Zaidi, Mohamad Faizal, and Siti Norezam Othman.(2011) "Exploring the concept of technology management through dynamic capability perspective." International Journal of Business and Social Science 2.5 :41-54
6. Aigbavboa, Clinton Ohis, Andrew Ebekozien, and Nompumelelo Mkhize. (2025), "An assessment of South African airlines’ growth in the era of fourth industrial revolution technologies: the unexplored dimension." Journal of Facilities Management 23.1 19-33
7. Al Khaldy, Mohammad. (2025) "Exploring the Impact of Business Intelligence on Real-Time Supply Chain Decision-Making." Al-Basaer Journal of Business Research 1.1
8. Alshurideh, M., (2022) "Does electronic customer relationship management (E-CRM) affect service quality at private hospitals in Jordan?." Uncertain Supply Chain Management 10.2 325-332
9. Alzoubi, Haitham M., et al. )2022( ,"The Role of Supply Chain Integration and Agile Practices in Improving Lead Time During the COVID-19 Crisis." IJSSMET vol.13, no.1 2022: pp.1-11. https://doi.org/10.4018/IJSSMET.290348
10. Bagshaw, Karibo B. (2017): "Process and product design: production efficiency of manufacturing firms in Rivers State, Nigeria." Engineering Management Research 6.1 49-55
11. Bai, Liang, E. A.. (2024). Application research of production scheduling and energy consumption management system in heat supply field. Ninth International Symposium on Energy Science and Chemical Engineering (ISESCE ). Vol. 13172. SPIE, 2024.
12. Bai, Liang, et al. (ISESCE 2024). "Application research of production scheduling and energy consumption management system in heat supply field." Ninth International Symposium on Energy Science and Chemical Engineering Vol. 13172. SPIE,
13. Chinnaraju, A.. (2025). . Partial Least Squares Structural Equation Modeling (PLS-SEM) In The AI Era: Innovative Methodological Guide and Framework for Business Research.
14. customer relationship management successfully: a configurational perspective.
15. Daneshjo, N., Rudy, V., Drábik, P., & Malega, P. (2020). Methods and procedures applied to design of production processes and systems. TEM Journal, 9(4), 1435
16. Daneshjo, N., Rudy, V., Drábik, P., & Malega, P. (2020). Methods and procedures applied to design of production processes and systems. TEM Journal, 9(4), 1435.
17. Ellul, Jacques. (2018). The technological system. Wipf and Stock Publishers,.
18. Ellul, Jacques. 2018, The technological system. Wipf and Stock Publishers,
19. Ernst, Holger. "Patent information for strategic technology management. (2003) " World patent information 25.3 :233-242
20. Fischer, R.. (2010). & Milfont, T. L. . Standardization in psychological
21. Fonseca, L., Amaral, A., & Oliveira, J. (2021). Quality 4.0: the EFQM 2020 model and industry 4.0 relationships and implications. Sustainability, 13(6), 3107
22. Goodwin, M. E. A., E. J. Koops, and R. E. Leenes. 2010, Dimensions of technology regulation. Wolf Legal Publishers (WLP),
23. Govindarajan, Sangeetha, and Balaji Ananthanpillai. (2024),"Leveraging Data Analytics for Product Decision-Making."
24. Hasan, Md Rakib, Selim Molla, and Iqtiar Md Siddique. (2024) "Next-gen production excellence: a deep simulation perspective on process improvement." Journals of Mechatronics Machine Design and Manufacturing 6.1 7-20
25. Hendrawan, Satya Arisena, et al (2024). "Digital transformation in MSMEs: Challenges and opportunities in technology management." Jurnal Informasi dan Teknologi 141-149
26. Hilton, Sam Kris, et al. (2023) "Dimensions of transformational leadership and organizational performance: the mediating effect of job satisfaction." Management Research Review 46.1 1-19
27. Jambol, Dazok Donald, et al. (2024) "Enhancing oil and gas production through advanced instrumentation and control systems." GSC Advanced Research and Reviews 19.2 043-056
28. Jarrahi, Mohammad Hossein, et al. (2021) "Algorithmic management in a work context." Big Data & Society 8.2: 20539517211020332
29. Krejcie, Robert V., and Daryle W. Morgan. ((1970): "Determining sample size for research activities." Educational and psychological measurement 30.3 607-610
30. Lee, K., et al. (2022),"The effect of digital supply chain on organizational performance: An empirical study in Malaysia manufacturing industry." Uncertain Supply Chain Management 10.2: 495-510
31. Lillis, Anne M. (2002): "Managing multiple dimensions of manufacturing performance—an exploratory study." Accounting, organizations and society 27.6 497-529
32. Margherita, Emanuele Gabriel, and Alessio Maria Braccini. (2023) "Industry 4.0 technologies in flexible manufacturing for sustainable organizational value: reflections from a multiple case study of Italian manufacturers." Information Systems Frontiers 25.3 995-1016
33. Margherita, Emanuele Gabriel, and Alessio Maria Braccini. (2023): "Industry 4.0 technologies in flexible manufacturing for sustainable organizational value: reflections from
34. Michna, Anna, and Joanna Kruszewska. "PRODUCTION MANAGEMENT AS ONE OF THE DIMENSIONS OF THE INDUSTRY 4.0 IMPLEMENTATION. (2023)." Scientific Papers of Silesian University of Technology. Organization & Management/Zeszyty Naukowe Politechniki Slaskiej. Seria Organizacji i Zarzadzanie 171
35. NIST/SEMATECH. (2013). . e-Handbook of Statistical Methods. National Institute of Standards and Technology. Retrieved from https://www.itl.nist.gov/div898/handbook
36. Nyamekye, Patricia, et al. , (2024) "Sustainability aspects of additive manufacturing: Leveraging resource efficiency via product design optimization and laser powder bed fusion." Heliyon 10.1
37. Oliveira-Dias, Diéssica, et al. (2025): "How does the technology environment impact supply chain strategy and operational performance?." Journal of Manufacturing Technology Management 36.1 203-226
38. Reiman, A., Kaivo-Oja, J., Parviainen, E., Takala, E. P., & Lauraeus, T. (2021). Human factors and ergonomics in manufacturing in the industry 4.0 context–A scoping review. Technology in Society, 65, 101572.
research. International Journal of Psychological Research, 3(1), 88-96. Universidad de San Buenaventura. https://www.redalyc.org/articulo.oa?id=299023509006.
39. Rijwani, T., Kumari, S., Srinivas, R., Abhishek, K., Iyer, G., Vara, H., ... & Gupta, M. (2025). Industry 5.0: A review of emerging trends and transformative technologies in the next industrial revolution. International Journal on Interactive Design and Manufacturing (IJIDeM), 19(2), 667-679.
40. Rijwani, T., Kumari, S., Srinivas, R., Abhishek, K., Iyer, G., Vara, H., ... & Gupta, M. (2025). Industry 5.0: A review of emerging trends and transformative technologies in the next industrial revolution. International Journal on Interactive Design and Manufacturing (IJIDeM), 19(2), 667-679
41. Shaikat, F. B., Islam, R., Happy, A. T., & Faysal, S. A. (2025). Optimization of production scheduling in smart manufacturing environments using machine learning algorithms. Lett High Energy Phys, 12(1), 1-15
42. Shao, Dong, et al. (2024) "Foreign executives, digital transformation, and innovation performance: Evidence from Chinese-listed firms." Plos one 19.6: e0305144
43. Silan, M. A. (2025). When can we treat Likert type data as interval? [Preprint]. HAL. https://hal.science/hal-04927866v1Rutkowski, I.. Stevens’ measurement scales in marketing research–A continuation of discussion on whether researchers can ignore the Likert scale’s limitations as an ordinal scale. Marketing Instytucji Naukowych i Badawczych, 55(1).
44. Siu Mane David Lai Wai, Lai, Ashley Keshwar Seebaluck, and Viraigyan Teeroovengadum. (2011), "Impact of information technology on quality management dimensions and its implications." European Business Review 23.6 592-608
45. Skorupińska, Ewa, Miloš Hitka, and Maciej Sydor. (2024), "Surveying Quality Management Methodologies in Wooden Furniture Production." Systems 12.2 51
46. Tambunan, H. N., Haribowo, R., Akbar, A., Munizu, M., & Pandiangan, S. M. T. (2025) Operational Management for Business Production Processes.. International Journal of Education, Social Studies, and Management (IJESSM), 5(1), 161-169.
Technological Forecasting and Social Change, 199. 123083. ISSN 0040-1625
47. Wowling, Steiva Amerlian Sandra, et al. (2024), "Product Quality And Pricing Influence On The Brand Reputation Of Loco Coffee Fast Food Products." Jurnal Darma Agung 30.2 541-548.
Downloads
Published
Issue
Section
License
Copyright (c) 2026 احمد عبد الحسين ناصر محيسن العبادي، أ.د احمد عبد الحسين الامارة
This work is licensed under a Creative Commons Attribution 4.0 International License.
which allows users to copy and create excerpts and summaries, and thus create new scientific works from the article or modify it and benefit from the scientific material, provided that the user refers to the link to the original article
